HOHXEN 110mm Hole Saw,M44 HSS Bi-Metal,Hole Opener Drill Bit Cutter Tool for Wood Aluminum Iron Sheet Pipe Plastic

Product Information

Hellers HSS, bi-metal hole saw kit is a great choice for numerous tradesmen, and electricians in particular. Our HSS M35 Cobalt Bi-Metal holesaws have a variable pitch tooth pattern which ensures smooth cutting and less "chatter" when drilling metal, particularly thin sheet. The Starrett CTD hole saws feature three different angles ground onto the cutting face of each tooth on the saw. They are particularly suitable for plumbers, electricians and other installation engineers and an invaluable tool in the construction of flues, air vents and plumbing or electrical channels.

Hole Saws | Bosch Professional Accessories Hole Saws | Bosch Professional Accessories

Hole saws for impact drill/drivers, rotary drills, and rotary hammer drills are mounted on an arbor and utilise rotational forces to cut through the material in a circular fashion.Made to the highest standards with an extremely hard wearing toothed edge, giving your tool a longer lifetime.

Hole Saws - Bunnings Australia Hole Saws - Bunnings Australia

As hole saws only cut around the perimeter of a hole, they are usually faster and more efficient than standard drill bits and are the preferred choice for cutting larger holes.This Heller HSS Bi-metal Hole Saw is perfect for creating clean, circular holes thanks to its ingenious precision manufacturing.

110mm Bi-Metal Holesaw With Arbor And Pilot Drill. M35 5%

Made from high quality M35 grade 5% Cobalt HSS steel cutting edge and compatible with most makes of arbor. Its tough tungsten carbide tipped teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf. The Deep Cut saw features an increased depth of 51mm (2") and is ideal for cutting metal and tubes with a thickness of greater than 3mm, and wood up to 51mm (2") thick. Clarke's hole cutter set includes 6 popular sizes of bi-metal hole cutters plus a hex drive adaptor and pilot drill.

This saw is particularly suitable where there is a requirement for a high-quality surface finish on the entry and exit hole and provides a smooth cut when cutting traditional lath and plaster. Featuring a synthetic diamond grit cutting edge permanently bonded to a tough steel body, this provides the necessary clearance for cutting at high speeds. There are different types of hole saws and they generally range in size between 14mm and 210mm in diameter. Having the right size hole saw cutter for your specific application can save valuable time and effort on-site.

Hole Saws and sets - Machine Mart Hole Saws and sets - Machine Mart

High performance Diamond Grit Hole Saws are perfect for drilling holes in non-metallics and offer the ideal cutting solution for the toughest situations. High performance Diamond Grit Tile Drills are ideal for drilling small diameter holes in many non-metallics. Machine Mart Limited is authorised and regulated by the Financial Conduct Authority, register number 703528 and acts as a credit broker and not a lender. A cost-effective solution for cutting through nail-embedded wood, or virtually any wood and metal combination, reinforced concrete, and fibreglass.

This 3-ply tooth grind delivers a fast cut, minimal snag when the saw begins the cut, efficient swarf removal minimising heat build-up and maximum saw life. The Bosch range includes holes saw cutters for stainless steel, or hole cutter for wood, drywall, plastic, tile, and stone.