Makita DTD171Z 18V Li-ion LXT Brushless Impact Driver - Batteries and Charger Not Included

Product Information

This is where you begin the notice the differences between the two 18v Makita impact drivers. The Makita DTD171 has 4 pre-set speed settings, and they are: Max: Power Selection: The cordless impact driver has electronic 4-stage impact power selections to choose from. This allows you to have complete control of the tool thanks to the variety of power levels, allowing you to adjust the power depending on the task at hand. Brushless motor: The brushless design on this impact driver’s motor means that it continuously offers frictionless performance with little to no maintenance. This saw’s motor has a smaller number of moving parts, giving it the advantage of a more compact design. It features an electronic brake, a conveniently located push-button for forward and reverse and an LED job light with pre glow for use in low visibility applications.

Electronic 4-stage impact power selection providing a no-load speed of 3600rpm providing up to 3800ipm, the percussive action saving time and effort, driving screws up to 30% faster than a conventional drill/driver, no pilot hole is needed even into hardwood. If your job involves driving screws into concrete or hardwood, then the Makita DTD152Z can be your best alley. You might also want to consider a few other options we have mentioned as runner ups. The Makita DTD171 18V LXT Brushless Impact Driver from ITS is the topline 18V driver model available from Makita with an impressive list of specifications to show for it. TD111DSAJ is a boss tool to work with M5 to M14 standard bolts, M5 to M12 high tensile bolts, M4 to M8 machine screw, and coarse threaded screws 22 to 90mm. It has three impact modes: low, high and the latest A (Impact) mode. The advanced A method prevents any screws cross threading and cam-out by reducing the drive speed once the tightening starts.In line with all new Makita tools the performance increases whilst the overall size of the machines decreases. The new top-of-the-range Makita DTD171 impact driver has a compact overall body length of just 117mm and weighs only 1.5kg. The DTD172 is a brushless impact driver powered by an 18v LXT Li-Ion battery. Key features include a LED job light with pre-glow & after glow function. Hence the device runs efficiently for longer that also without overheating. Moreover, the integrated XPT protects the device from extreme dirt, debris and liquid to maintain the performance and discourage downtime. Both Makita impact drives have the same impacts per minute at 3,800 and no load speed at 3,600. It’s quite disappointing that Makita did not increase these in the DTD171, however, 3,800 IPM and 3,600 RPM is still very good. Brushless Motor

The 18v impact driver comes with a pair of super bright LED lights that does a great job by widely spraying the shine. It’s also integrated with Xtreme Protection Technology (XPT), which promotes dust and drip-proof performance. Due to its blessings, DTD152Z is least concerned about the dirt while at work. Part of Makita CXT series, TD111DSAJ uses a brushless motor that eliminates carbon brushing. It’s the reason why the impact device runs efficiently for a long time without overheating. It uses this saved energy to provide the given RPM, speed and torque to match the demand of materials as well as working conditions. Soft start adds to the ease of use while trigger controlled variable speed gives you complete authority over the material. LED lights are also in its front with pre-glow and after-glow functions. Makita DTD154 is one of Makita’s best selling impact drivers in the UK, and now, it has been replaced by the Makita DTD171. If you are looking to replace your impact driver and wondering if it is worth spending extra on DTD171, we will compare them side by side to see the differences. TorqueMakita TD127DZ adds to its value by offering variable speed control via a trigger for better controlling on the specific material or other conditions. To be more helpful, it has LED lights with pre-glow function. This light illuminates the area very well and allows you to work in the dark reigns. Size, weight and ergonomics: Makita impact tools are generally compact and lightweight. But, they are available with various dimensions and heft. Slim options will be thin, which will not put much pressure on your wrists. So, choose a model that you can easily control and use. It will be better if the impact device has a soft and ergonomic grip for added convenience. New impact mode, 'Assist-Mode' drives slowly to start screw before full tightening to eliminate "screw cam-out" and "cross threading“ The new Makita DTD170 impact driver is technically a 6-function impact driver, with four speeds and matched impact power: then the newly introduced operating mode, 'T-Mode' is used for tightening self-drilling Tek screws and the new A-Mode (Assist mode) which, when selected starts the rotation slowly allowing maximum control of the screw as it starts to bite into the material. Once the impact driver detects the screw tightening it switches to full speed and full impact power to complete the tightening sequence. The A-Mode is designed to eliminate ‘screw cam-out’ and ‘cross threading’ caused by high speed rotation before the screw bites in the material. Accessories: Some of the Makita impact drivers are sold as body only product wherein there is no battery or charger. For example, Makita DTD152Z. On the other hand, some of the models include the cell as well as a charger, like the Makita TD111DSAJ. Choose according to the available resources. If you have a battery or charger that’s compatible with the selected model, you do not have invest in a new one. Frequently Asked Questions

There is a push button to change the movement from forward to reverse and vice versa. For enhanced safety and convenience, the device has electric brakes as well as LED lights on its front. Moreover, it’s built with an ergonomic grip that gives you comfortable handling and minimum wrist stress. The DTD has a 1 mode which is the following: Tek Mode – This mode gives you full power at the beginning of driving the screw in, once the screw is almost all the way in, the impact driver reduces power to ensure the screw is flush, and to avoid over tingeing of the screw, and screw cam-out. Is it Worth Upgrading From The DTD154 to DTD171?

Electric Brake: The 18v brushless driver has an electronic brake control, so the motor will stop and cut out as soon as the trigger is released. This allows the power tool user to have complete control when on the job. Maximum vibration generated by the device is 13.5 m/sec², and the sound level is 97 dB. Overall, DTD171Z excels in all the departments except one: the battery is not included.