Kit Repair Porcelain - PORC-a-FILLER - Porcelain Chip Filler

Product Information

area. Let the clay dry in place. Once dried, carefully remove it and fire it to bisque temperature. Verify that the fired pieces fit (it will be smaller due to shrinkage) the ceramic object, then adhere them with 2-part epoxy, and let it fully cure. Continuously Wash the Paving With Lots of Water. The person with the hose should alternate between following the sweeper to aid washing the compound into the joints and moving ahead of them so that the paving is always wet. This is particularly important in warm/hot weather conditions. Sand. If you’ve made any mistakes and the dried putty isn’t completely flush with the rest of the sink, use a fine sandpaper to sand it down until you’re satisfied. UniBond Repair Express Power Putty can be sanded after five minutes of it being applied.

Allow filler epoxy to cure for 12 hours or more at a temperature of 75°F or warmer. Alternatively, place the filled object in a kiln heated to 110°F for eight hours. Placing the object under a lamp is another good option to optimize hardness for If the repair lines are not acceptable to you, and a seamless repair is desired, the required skill is much greater. Color matching and re-creating an artist’s work and style takes time. We use high-end acrylic paints or coloring pigment powders

How to Choose the Best Porcelain Repair Kit

If heavy or prolonged rain is forecast, it is ideal to wait for drier conditions as heavy rain may disturb sand particles in the EASYJoint mix before it cures solid, giving an uneven texture. Prolonged rain will also extend the curing process. EASYJoint brush-in patio grout , is a really simple, fast and DIY friendly way to fill the joints in paving slabs and flagstones. Market-leading EASYJoint is ideal for all types of paving such as natural stone, limestone, porcelain, sandstone, Yorkstone, Indian Stone, granite setts and concrete flags. Yes, theoretically EASYJoint can be used below 3 degrees down to freezing conditions, however in these conditions, the use of lots of water becomes more difficult with a greater risk of staining. Where possible avoid using below 3 degrees, use with caution. Does EASYJoint stain paving slabs? If you’re fixing a bathtub, the last thing you need is a formula that doesn’t withstand water. Corrosion is a regular issue that these repair kits must endure, and you should never consider a low-quality product that will get ruined as soon as some water drops fall over it. Caution: Before cleaning, you may want to put on clean gloves to protect your hands from any sharp edges.

EASYJoint can be installed dry, however to use this method the paving must be sealed at least 2 - 3 days before the EASYJoint application. The paving slabs must be sealed on five sides (the top and four edges). When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water. If you have a piece of ceramic that’s broken in more than a couple of pieces, plan the attachment sequence to avoid being left with a final piece that cannot be easily attached or fit in. Numbering the pieces after a dry run is a good idea and will

Ideal for use with natural stone, limestone, porcelain, Yorkstone, Indian Stone, granite setts and concrete paving slabs