Black Micro Irrigation Pipe (Tube), 4mm/6mm - 50m

Product Information

If using pre-assembled micro sprays on stakes, the effort in the previous step has already been made for you. Use the hole punch to pierce the main supply pipe, insert the tube adaptor already connected to the micro pipe into that hole, and then position the stake to suit your requirements.

For many customers and contractors it is preferable to undertake a full or partial installation of a system themselves. We are please to offer a service of design and supply or partial installation for most types of irrigation systems. These systems would be designed to provide the same quality of Irrigation system we would provide in one of our own installations be it a private garden Irrigation system or a Bowling green irrigation system. With a scale map of your garden, draw a path from your water source past all the micro sprays you have planned. This path can branch off in different directions (using tee connectors) and do 90° turns around obstacles (using elbows). The idea of a watering system is to be hidden, so consider the best route for the pipework to follow to ensure it is out of sight. This could be underground (up to 5cm), under mulch, hidden behind bushes, or neatly pinned to a wall or fence. Metres of 13mm Irrigation Supply Pipe - This is the primary water carrier and will run past all the micro sprays we want to use in our irrigation system. TOP TIP: Position sprays placed along edges or in corners 2-5 cm from the edge to prevent overspray onto paths, fences and walls.

For corners of garden beds, use the 90° (quarter-circle) Microjet Sprays to ensure we don't overspray onto walls, fences or paths. 90° Microjet Sprays are used in conjunction with 180° Microjet Sprays.

Main Supply Pipes – A frequently asked question is, “Do I need to take the system in for the winter?”. The simple answer is no. You should, however, do your best to drain the system of excess water to prevent damage from freezing water. Remove all the stop ends in your system and any other connectors at low points that can help drain the excess water system. Pipe Stakes and Wall Clips - Available for 19mm, 13mm and 4mm pipes, this secures the pipe in place. Use the stakes to secure the pipe to soil or wall clips to secure the pipe to walls, fences and posts. Our products include Drip irrigation, driplines, drippers, sprinklers, microsprinklers, pop up sprinklers, mini sprinklers, Tap timers, irrigation controllers, solenoid valves, solenoid valve manifolds, skid sprinklers, hose, hose fittings, tap fittings, hose reels, hose trolleys, pumps, tanks, and most irrigation related equipment.Anchor and fix the supply pipe in place using pipe stakes and wall clips. The ideal placement of stakes and wall clips for the main supply pipe is one every 50-150cm. The main supply pipe should ideally be laid within 20cm of the location of micro sprays if you have opted for the preassembled sprays on a stake with a short length of micro pipe. The longest length of micro supply pipe we want to use is 30cm. A micro spray irrigation system consists of a simple network of pipes with low-volume micro-sprays attached. These micro-sprays have been designed to irrigate or water small to medium size planting areas. The low-volume sprays installed for landscape and horticultural applications deliver a fine water spray covering one to three metres. Sprays used for agricultural applications, such as watering under vines and orchards, have a larger spray radius. A micro-spray irrigation system can provide efficient and precise water delivery to targeted areas in your landscape, nursery or orchard. The path we have drawn represents the main supply route. The pipe used for this is either a 13mm or 19mm Irrigation Supply Pipe, an LDPE pipe that is UV and weather protected, easy to cut to length and works in conjunction with 13mm or 19mm irrigation fittings, respectively. We can connect our micro sprays to this main supply pipe. All the components are available to buy separately, so you can easily customise your system's configuration. Later in the guide, we will discuss different configurations for different scenarios. Tricoflex hose has been used extensively in Horticulture, Sports and Amenity industries for many years.

for connection to the supply pipe, the base and 200mm dia. 650mm long PVC guard tube and an optional cast iron frame and cover. It is also possible to insert the micro spray heads directly into the main supply pipe by simply punching a hole using the irrigation hole punch, and then inserting the inlet of the micro spray into the punched hole. Lay the main supply pipe around the area to be watered. The tube will be more manageable if warmed in the sunshine before use. Initially, position it with weights until it relaxes. Connect the micro supply pipe to the main supply pipe by punching a hole in the main line with an irrigation hole punch and then inserting a tube adaptor into that hole. The tube adaptor creates an outlet for the micro supply pipe to connect to. Connect the other end of the micro supply pipe to the inlet of the micro spray stake.

Dosatron Water powered injectors

Nut and Tail Tap Adaptor - Connect each of the water timer's outlets to the main supply pipe used in our system. One for each outlet.