Siser EasySubli Sublimation Heat Transfer Vinyl 8.4" x 11" - 15 Pack

Product Information

It is possible, but not recommended or necessary that you flush the ink in a Sawgrass SG400 or Sawgrass SG800 to replace it with EasySubli inks. The reality is swapping inks isn't necessary - you can get just fine results using the sublimation inks you already have in your ink Sawgrass (or other) sublimation printer. Siser EasySubli is different than regular sublimation paper and HTV. Depending on the sublimation printer you have, you can print directly onto the EasySubli surface or you can use it as a base HTV to apply a sublimation print to. The ink doesn’t dry. In my Sawgrass printer, I have EasySubli inks that are specifically formulated to dry on this material. The Epson doesn’t have that same ink. I have tried heating as I mentioned above and I’ve allowed the print to sit for 48 hours and it still doesn’t dry enough to cut with my Cricut machine. For the previous method, we do not want to mirror the EasySubli. But with this process, we do need to mirror the sublimation print. You can mirror the image in Design Space or do it in the printer settings. Make sure you do it in just one place, not both.

For the printed image, I am printing on regular sublimation paper with my sublimation printer using sublimation ink. Let me try to answer some of the most FAQ on Siser EasySubli for you so you can decide if it's a product and process you want to try! EasySubli HTV has a slightly softer feel than the inkjet printable heat transfer for darks we tested it against That’s why it can’t be understated what an innovation being able to press sublimation transfers at 310°F is… your garments will thank you for it! Achieve the brightest colors and best results when paired with the specially developed printing profile and Siser EasySubli Inks by Sawgrass. Available for the Virtuoso SG500 and SG1000, Siser EasySubli Inks can do more than just print on EasySubli! Use Siser EasySubli Inks to achieve all your standard dye-sub needs as well, so there’s no need to switch out inks between projects. The low application temperature of 311°F even allows you to decorate heat sensitive fabrics like tri-blends and rayon!

Gerelateerde producten

Here’s my shirt after pressing with this method. These colors aren’t exactly what I had intended. The original file is more pastel, especially the lighter colors, and the greens are quite a bit different. It’s okay, it still looks great. Can and should I swap out the existing inks in my Sawgrass SG400 or SG800 sublimation printer for the EasySubli Inks?

After this blog post was first created, “Virtuoso Print Manager” has been updated to simply “Sawgrass Print Manager” or “Print Manager” and will be referred to as such or “PM” for the rest of this blog post.Upload your .jpeg or .png file and select “Simple”, “Moderately Complex”, or “Complex”depending on the level of detail in the image. This is good because, again, your garments are not under heat and pressure for an excessive amount of time, possibly damaging them. But, perhaps even better, you’re saving tons of time doing transfers in half the usual time!