Joined in 2023 
82 
63 About this deal
Alternatively, you can also use the Asus mobile app in step #3 if you use a phone or tablet instead of a computer. However, I recommend the web user interface even when you use a mobile device for the setup process.) Helpful mobile app, no login account required will fill in the rest of the house, and 2.4GHz will still be available for the widest coverage. There’s also the benefit that moving the devices that can use 6GHz to the new bands can free up some space on 5GHz. The tech specs of the Asus ZenWiFi Pro ET12 are dazzling, starting of course with the Wi-Fi 6E support. Remember that your other devices will need to be capable of Wi-Fi 6E connectivity to get the best speeds, but older Wi-Fi standards are of course supported as well. Across the three bands offered by the unit – 2.4GHz, 5GHz and the newly introduced 6GHz – you can get speeds up to 11,000Mbps and cover more than 550 square metres, which should be more than enough for most people's needs. In a Dual-WAN setup, you can use any other LAN port including its 2.5Gbps LAN as the secondary WAN.
This flexibility makes it easy to build a whole home mesh with ASUS, though the freedom also means adding nodes can be a bit more troublesome. You’ll want to keep your fastest nodes at the core of your network, and you should keep in mind that while you can pair an older router with your ET12 system, doing so could impact your wireless performance in that area. For the most part, you want your nodes to have about the same performance as the core of your system. ASUS ZenWiFi Pro ET12 review: What's not so good By default, this mesh is configured with the 2.4GHz and 5GHz bands under the same SSID with the 6GHz band as a separate SSID. In attempting to connect to 6GHz, the phone would report no internet connection and disconnect. A Windows 11 PC with a 2x2 Wi-Fi 6E card connected without issue. Based on my understanding of your posts, either of the three ASUS ET12, ASUS ET8, and ASUS XT8 should meet my objectives. I’m leaning toward ET8 as it has many features of ET12 including 6E, given there are no new firmware issues since your last review. Per Asus’ naming convention, X is short for Wi-Fi 6 (802.11a x), and E is for Wi-Fi 6E (802.11ax e). The letter T signifies that these are Tri-band broadcasters — they both have three Wi-Fi bands.
The process of setting up mesh equipment like this is usually the same no matter what manufacturer you're dealing with. One unit plugs straight into your router, the other unit goes somewhere else in your home, and they both talk to each other to blanket all of your rooms in high-speed Wi-Fi. There's usually an app to guide you through everything as well, which is the case here too. However, one thing to note is that using the app can inadvertently turn on or off specific settings that could cause the router to behave unexpectedly. In this case, you’ll have to reset the router and set it up from the beginning. This mesh kit consists of two fairly large nodes at 4.5 inches wide and 9.5 inches tall. The top few inches is an acrylic housing for eight external antennas. Four antennas at the corners stand straight up, while the other four are at 45-degree angles. This should ensure good coverage in multi-story homes, as well as on the same level as the router itself. With 10 total antennas listed, it's safe to assume ASUS has put the 2.4GHz antennas inside the main housing.
Fixed null pointer dereference vulnerabilities. Thanks to Chengfeng Ye, Prism Research Group - cse hkust contribution. If I were to upgrade my routers to a multi-gig wired setup, could I run both units from a pair of ET12s in AP mode and combine them with, say, a GT-AX6000 in router mode? I realise the combo wouldn’t play nice in AIMesh, but I don’t need 6GHz support at the router location (nice-to-have at AP locations though!) and prefer manual control over channel numbers. Lastly, I upgraded from a single AMPLIFI alien, to the ET12 pro. I have a 1.2gb plan and was really hoping to see speeds stretch above 600-800mbps on Wi-Fi with these units, but performance has been about the same around 450-600, upload speed actually a little lower than the alien. I have a 2.5gb modem, 2.5/10gb switch. Figured going above on all my equipment would let me get the most out of my plan. Am I being unrealistic with expectations or was the alien just that solid? Reply What is your recommendation, please? Will I regret not going with ET12? Are there key points I’m not considering?One 5 GHz band with a total maximum bandwidth of 4804 Mbps. It can work using either Wi-Fi 5 or Wi-Fi 6. QoS” stands for the quality of service, and it enables users to prioritize Internet traffic to support different applications or services.
Great Deal 
New Comment