MARS HYDRO Newest TS 1000 LED Grow Light 100x103CM Dimmable Grow Lights Daisy Chain Grow Lights Full Spectrum for Indoor Plants Seeding Veg Flower Growing Lamp

Product Information

Happy to report that the FC 1000 from Mars Hydro comes with everything necessary to mount it on the ceiling of a cabinet, ceiling, or grow tent. Here you see the on/off switch, the daisy chain entries, and the dimmer between 0% and 100% Driver A Mars Hydro Grow TS1000 komplett készletének köszönhetően többé nem kell semmi extra vásárlást csinálnia. A csomagban megtalálható a Mars Hydro TS1000 lámpa, az akasztó, a pánt, a termesztő sátor 70x70x160, a szénszűrő ,az időzítő , a hőmérő, a rögzítő szalagok , a rugalmas csövek (83 cm), a ventilátor és a virágcserép. Nem kell aggódnia a bonyolult telepítés miatt. A Mars Hydro Grow TS1000 készletet bárki könnyedén összeszerelheti. It uses a high-quality driver that is mounted onto the grow light. I suspect you could also take it off and mount it elsewhere if needed. You won’t need to dim the TS 1000, as the highest intensity of about 500 uMol is exactly what’s needed for the vegetative phase, and wouldn’t require dimming during flowering either.

Another thing I really like about this light is the passive cooling. There is no cooling fan for the unit, and this probably accounts for the slimline look of the Mars Hydro TS 1000W. As a result, there is virtually no noise at all from the unit when in operation. How does the TS 3000 compare to other similar LED grow lights for 4×4 feet coverage? A lot of people ask me about the Spider Farmer SF 4000 vs Mars Hydro TS 3000. Mérje meg a növesztési területet. A felület kiszámításához szorozza meg a hosszúságot x a szélességgel. Considering the cost of these grow lights, the ability to maintain strong intensity at the edges of the coverage area is pretty impressive because the light from most other cheap LED grow lights tend to drop off long before the edge of their respective coverage area. I’m always keen to choose grow lights that are highly efficient, cost effective and reliable. As a result, I knew that the Mars Hydro TS 1000 was well worth trying.The Mars Hydro TS-3000 includes the ability to separate the drivers from the grow light, and locate them outside your grow tent. This can be incredibly helpful to maintain proper temperatures in your tent. Pros & Cons: I was very impressed with the temperature performance of the TS1000W. For a passively cooled LED grow light, it only raised the temperature of my grow tent by 5°C (9°F) above the ambient temperature in my garage. The temperature in my grow tent is currently sitting at 27°C (80°F) while the ambient temperature is 22°C (71°F). Producing a wide footprint of consistently intense full-spectrum light, the Mars Hydro TS1000 is always a great choice for indoor plants, but it might not be right for every buyer. Since it requires overhead mounting points, users must commit to installing ceiling hooks or building some sort of framework from which to suspend the unit. For those who need a grow light that will look great in their living room, the industrial appearance of this one may not fit.

Detachable drivers on Mars Hydro TS 3000 – ability to hang it 6 feet away – possibly outside grow tent which would help keep temperatures down inside your grow tent. The SF 4000 does not have detachable drivers. Light requirements change for different plant-life stages. Seedlings only need low-intensity light between 100 and 200 micromoles/m2/s, while plants in the vegetative growth stage need a PPFD range from 200 to 500. Flowering and fruiting plants require the most light, at least 500 to 600 for optimum performance. The high PPFD output and adjustability of the Mars Hydro grow light allows for a wide range of flexibility for growing all types and ages of plants.The higher number of LEDs on these larger Mars Hydro TS Series grow lights are able to get the intensity up to 1160 uMols at 15 inches, or 900 uMol at 18 inches. That’s approximately enough intensity to get near maximum yield out of your cannabis plants. I’d also like to see an on/off switch included. Admittedly it’s not totally necessary and other quantum boards don’t include this feature either. My plants have THRIVED under the grow light. THRIVED. Having it has really lit a fire in me, plant care-wise, so they’ve all been watered, fertilised and cleaned far more often than ever before. How do you use the MarsHydro TS1000? One TSW 2000 and get higher light intensity (PPFD), and cover 3x3ft. The Mars Hydro TSW 2000 is similar to buying a HLG 550 V2 at a fraction of the cost.