Howdens Lamona Fan Oven/Cooker Heater Element (1800W)

Product Information

If your oven's heat distribution is poor, you may have to move your trays around to get even results. The symbols used by manufacturers for pyrolytic cleaning aren't consistent, but examples include a capital P, or a series of dots or diamond shapes that increase in size. But most ovens tend to use similar symbols, so once you've learned what to look for (below), you should be able to navigate your way around most you come across.

to Replace an Oven Element – Oven Not Heating? - Ransom How to Replace an Oven Element – Oven Not Heating? - Ransom

Always ensure that youmake a note of which way round the wires are connected to the oven element before you remove them. Several reasons can cause this to happen including a timer not correctly adjusted, or the function and temperature not being set properly.This would normally not be considered as a fault – but if you’re worried about excessive steam then an experienced technician will diagnose and fix any fault for you.

Lamona Fan Oven Heating Elements - UK Whitegoods

The temperature indicator light will help determine whether Your Lamona oven not heating up is due to an element or a thermostat fault. Good grills will make sure all your food gets crisped or browned evenly, poor grills will give patchy results. If you use the full grill, you’ll be able to cook a lot of food at once - a good choice for anything that sizzles, such as sausages and bacon. A good option for single-shelf cooking of pastries or scones, or something substantial such as a large fruit cake.When you re-set the RCD and turn your oven back on everything will appear to be working fine; the fan will be working, the thermostat light (if you have one) will be lit, but there will be no heat. With rapid heat elements and an A energy rating, Lamona ovens fit seamlessly into any trendy kitchen design.

Lamona LAM3400 Main OVEN FAN COOKER HEATING ELEMENT 1800W

If you happen to pull off a connection the wire may remain in the rear of the oven and you will have to gain access to the rear.

A simple reason could be the sensor is actually touching the wall of the oven affecting its operation – or the temperature sensor may be faulty and need replacing. With touch control features such as fan cooking, rapid heating, and defrosting at fingertip command. Then, use a pair of needle-nosed pliers or your fingers to gently pull or slide the colored wires away from the terminals on the element's backside. Position the element over the bottom surface of the oven, with the metal screw plates facing down and the terminals facing the rear of the oven.