Clear water Hot Tub, Pool and Spa Test Strips x 50-3 in 1 - Measures Chlorine, PH and Total Alkalinit (Pack of 1 (50 Strips))

Product Information

Find out how to shock dose your hot tub or see our Shock Dosing How-to Guide further down this page. See below for some easy chemical maintenance steps or continue reading our hot tub chemical guide for more detailed explanations and dosage suggestions.

Remove the cover from Lay-Z-Spa to allow evaporation of the chlorine (keep the filter running constantly). Please note: Allow at least 2 hours between adding each chemical type and only use the hot tub once Total Alkalinity, pH and chlorine are within the required ranges. Chlorine used in pools helps prevent algae,but extra protection using ClearWater Algaecide really is both prudent and cost effective. ClearWater Clarifier contains flocculants that bind small particles of debris and algae together making it easier for your Lay-Z-Spa’s filtration system to capture and keep the water clear. The frequency of water changes should reflect the degree of use of the hot tub, as well as the results of chemical testing.This helps filters last longer, reduce the quanity of chemicles that you use treating the spa and also increase the lifetime of your pump. It's advised to shower before using your spa to wash off natural oils, deoforants, moisturisers etc. Hot tub chemical maintenance is an essential part of owning a Lay-Z-Spa and is necessary for clean and healthy bathing water. Using the chlorine, alkalinity and pH dip test strips to check water balance enables you to identify what chemicals need to be added to bring them within the correct parameters.

Empty water, clean hot tub inside and out, backwash the pump, replace filters and re-fill with fresh water. Free Chlorine refers to the amount of chlorine in your hot tub that is available to sanitise or disinfect the water, keeping it safe for users.These small fast dissolving tablets can be added straight into the water for a quick nd effective chlorine boost. It is a good idea to get into the habit of giving your Lay-Z-Spa a nice clean at least once a month. Clearwater Test Strips are the quick and easy way to check chemical levels in any hot tub or above‑ground pool.

Accurate measurement of pool or hot tub chemicals is important to make sure you maintain the cleanliness of your water with balanced levels. These ClearWater Dip Test Strips are ideal for testing the total alkalinity, pH and Chlorine levels in your pool or spa.Dip a ClearWater® Test Strip in the centre of your Lay‑Z‑Spa, remove and hold it still for 15 seconds. This includes the kit products but also with other products like bleach or weedkillers – a dangerous reaction may occur.