Joined in 2023 
82 
63 About this deal
Yeah the Delta for gaming doesn't necessarily Alert me. FWIW I took the fan filters out and it did make around a 3 deg celsius improvement. Room temp is 71deg F or 22 deg celsius. So having an idle temp in the high 30s seems strange.
However all that said, when I ran the O11D as a dual 360mm radiator exhaust and completely passive intake from the rear and bottom, my idle coolant temps were no where close your levels. My max load levels were about your idle temps in the Winter with a similar 22C ambient. Something isn't quite right. The part I don't like is with the glass off and a 22C room ambient, it should take deliberate gaming load or hours of idle time before you should see a coolant temp creep to +13C over ambient and frankly I don't think it should ever be +13C over ambient at idle in that case.Tản nhiệt nước Corsair H150i ELITE CAPELLIX sử dụng quạt PWM cung cấp luồng gió mạnh mẽ, giúp CPU được mát mẻ kết hợp với 8 đèn LED RGB trên mỗi cánh quạt cùng tạo ra buổi trình diễn ánh sáng tuyệt đẹp. Manually applying all of the power possible to the fans for this test, we found them to top out at 2380 RPM, which falls into the 2400 RPM max that the specifications mentioned. At this time, we take on another level of noise production, where the meter showed us 70 dB of noise coming from the exhaust side of the radiator, at a foot away! Final Thoughts If you try to update the firmware of your iCUE Elite Capellix liquid CPU cooler and the update fails, it could be an issue caused by RGB motherboard software, such as Gigabyte RGB Fusion. To fix this issue, try the following steps.
The H150i ELITE CAPELLIX will cost more than other 360mm coolers, but you are not only paying for RGB. For that cost you are also getting an added bonus with the magnetic levitation fans which is one of the best bearings available! They are very quiet, only audible when being pushed near to full speed. The only noise they emit will be from airflow. The pump is also very quiet, operating at under 20 dBA! This is actually the second Elite Capellix AIO I've gone through; I returned the first due to a noisy pump, though it also had high liquid temperatures as well. Ambient temperature is ~22 C, it's winter time and in a basement. From a cold boot, the coolant starts at 25 C and constantly creeps up from there. I've tried setting the radiator fans to both exhaust and intake which didn't seem to make much of a difference. I've repasted this CPU about five times now as well.Make sure that the header is USB and, if the header does not have a plastic guide around it, make sure that the connector is plugged in to all the pins. Currently the radiator is set to top intake, with the bottom case fans also being intake and the sides being exhaust. I originally had the radiator set to exhaust with bottom/sides intake, but tried reversing it in hopes of remedying the issue. over ambient at idle seems too high for me. It seems like you have the radiator as top exhaust. So bottom and side are intake? This seems like too much to be a airflow issue, but take of the large side glass off at idle and see what happens.
When it comes to thermal resistance, Corsair’s latest AIO cooler initially seems to be slightly outperforming all of the 360 mm coolers that we have tested to this date. The average thermal resistance of 0.0808 °C/W is almost identical to the figures we received from the recently released NZXT X73, with Corsair’s MagLev fans giving the H150i Elite Capellix a small advantage in terms of acoustics.The Corsair H150i Elite Capellix seems to be getting the best thermal performance out of every similarly sized AIO cooler that we have tested to this date, outperforming NZXT’s X73 by a whisker. The performance seems to be fairly stable across most of the load range, offering predictable performance regarding of the load, with the exception of very low loads where the temperature difference is far too small for appropriate heat transfer between the mediums.
Great Deal 
New Comment