Kreg KJDECKSYS20 Deck Jig

Product Information

The Predator Jet PU Work Gloves are lined with a 13 gauge seamless Polyester liner and have a Polyurethane palm coating. These boards come finished with two different profiles, giving you the ultimate flexibility and allowing you to get creative with your outdoor space. The STANLEY Tylon tapes comply with European class II standards. This means the maximum permissible tolerance over 3 metres is less than a millimetre. Conversely, dry cedar boards should be spaced 1/4″ apart to avoid damage when the material absorbs moisture and expands, narrowing that gap. Leave a 1/8″ space between butted ends as cedar will also expand lengthwise. Please note: Should you need any additional screws, please use the Kreg 2" screws as these are made specifically for this system. These can be found at the bottom of this product in related items.

Trend PH/JIG Pocket Hole Jig - Machine Mart - Machine Mart Trend PH/JIG Pocket Hole Jig - Machine Mart - Machine Mart

We aim to supply the best products possible. Please be aware of other outlets selling 'Sub-Standard' Balau! This makes the wood less susceptible to cupping, warping, expanding and contracting that wet wood typically undergoes. This means KDAT can be installed with a 1/8-inch gap. It should be noted that KDAT does need to be immediately stained and sealed after installation to protect it from the sun.

Also, keep in mind that this is an entire hidden fastener system, so the price point will be higher. The Tiger Claw TC-G Hidden Fastener system by FastenMaster is ACQ-compliant and compatible with grooved boards including Trex, Fiberon, Wolf, Veranda, Brazilian Redwood, Ipe, Ironwood, Teak, Cambara, and more. To select the correct glove size, simply measure across your palm at the point indicated in the last picture on this listing. Then compare your measurement with the chart below to ensure you select the correct glove size for your hand. A 1/8” gap can easily be accomplished through the use of an 8d nail. Lay the boards in place, using several 8d nails as spacers. While pushing the board flush against the spacers, secure the board into place with your choice of fastener.

7 Best Hidden Deck Fasteners | Which Is Actually The Best 7 Best Hidden Deck Fasteners | Which Is Actually The Best

If you can acclimate your wood, cover it and make sure it is not sitting directly on the ground, so it doesn’t soak up rain or groundwater. It also includes a handle for your fingers that makes it easier to free the spacers from fastened boards. Once installed, treated wood will dry out for a few months, which will cause it to shrink. With this in mind, wet wood should be installed butted together as a gap will be created as the wood dries and shrinks.You’ll also want to take into account the type and intervals of your fasteners. Fasteners are what hold boards in place, resisting their efforts to bend and move as the humidity changes. Kreg is much easier to work with when it comes to unscrewing. Since it is an open system, the screws are easier to undo so you won’t have much trouble. The jig itself has an easy-grip handle that gives you a secure hold and complete control over each and every joint. The tool automatically creates 3/16-inch spacing. The cool thing about this tool is that it allows you to get exact spacing while at the same time installing your fasteners, saving you a significant amount of time.