Joined in 2023 
82 
63 About this deal
The first and most obvious reason is if you have young children. Babies and toddlers tend to be early risers, so you may only have time to shower or have a relaxing bath in the evenings when they’ve gone to bed. If your bathroom extractor fan is old or noisy, it could wake your baby up. A silent fan removes this worry.
STERR - Black Aluminium Quiet Bathroom Fan with a Timer
Although we’re looking at silent extractors, it doesn’t change the fact that many of the features will be the same for any extractor. Extractors come in two sizes: 100mm/4 inches and 150mm/6 inches. In most cases, the 4-inch fan will remove moist air well enough to keep the bathroom smelling fresh and be less susceptible to mould. The only reasons you would need to consider a 6-inch extractor fan is if: An overrun timer gives it time to complete the job. You can set how long it runs for when the fan is installed, but most models offer settings from 30 seconds to 30 minutes. If you’re going to use this feature, it makes sense to leave it running for as long as possible to make sure it removes as much humidity as possible. Your bathroom is on the inside of the building and so has no windows at all. This is more common in flatsUntil you have one, it’s hard to explain the difference a silent bathroom extractor fan will make. It sounds silly, but removing unnecessary noise really does make a difference, especially when trying to unwind from a hard day. If you have access to roof space, an inline extractor fan system would be quieter and more efficient.
Bathroom Extractor Fan | Bathroom Fan | Wickes Bathroom Extractor Fan | Bathroom Fan | Wickes
A PIR motion sensor starts the fan if you move within 4 metres, so for my smallish bathroom it is always on. Can be a pro or a con depending how you see it. It’s a good idea to look for a fan with an overrun timer. This means it will continue to run for a set period after you switch it off. In most cases, you won’t stay in your bathroom long enough for it to have removed all the humid air before you switch off the extractor. Recorded at 26 dB, it’s on par with the Envirovent and louder than the Awenta, although the Awenta offers extraction of less litres per second. So, if you have a bigger bathroom or condensation is a problem, it might be better you go for a slightly louder model that has more power. Building regulations require that a domestic bathroom fan must extract a minimum of 15 litres per second. However, almost all extractors on the market exceed this and average 21-25 litres per second. There are even some models that go as high as 68 litres per second. If you’re concerned anyone in your home might forget to turn on the extractor, then definitely consider getting a model that includes a humidity sensor. The sensor will detect if the bathroom’s humidity exceeds a certain level and automatically switch on the fan.Depending on the schedule of other members of the household, it could also wake you up. If you have a spouse or flat mate that works late shifts and likes to shower when they get in at night, then a noisy fan running at all hours could disturb your sleep. The Xpelair offers two speeds depending on how powerful you’d like it to be. This will vary on bathrooms size, and will have an effect on noise level. The slower the fan needs to work, the quieter it will be. The timer can range from 30 seconds – 30 minutes, again this setting will depend on how hard you need the fan to work. This could be a good combo with the overrun timer; if there’s still a lot of moisture, even after the overrun, the humidity sensor will activate and complete the job. Do be aware, though, that the sensor won’t work as well if it’s dirty. Wipe it down every couple of months to ensure it works as intended.
Bathroom Extractor Fans | Extractor Fans | Screwfix
The Envirovent SIL100T is a great all-round option and the most well-known brand. Reliable and well-built, this fan is easy to install and will work without you noticing it too much. The LED is white and reflects off the fan well, especially if you go for a glass front. The PIR motion sensor and Timer are good, although are upgrades and don’t come with the cheapest model. As standard, the Envirovent has an extraction rate of 26 litres per second which is substantially more than the Xpelair above – this is the reason the latter is slightly quieter. If you want further reassurance, you can also look for fans with accreditation from the Noise Abatement Society. These products will be marked with the Quiet Mark, which is given to the manufacturers of the most silent products produced around the world.Even if your fan doesn’t wake anyone, it might simply be an annoying sound. If you’re unwinding in the bath after a long day, the last thing you want is the drone of the extractor fan running.
Great Deal 
New Comment