Joined in 2023 
82 
63 About this deal
The STL is ready, but there is one more thing to do before it can be printed. The bottom of the STL isn't flat, so it needs to be altered before printing. DIMMABLE - Whether you are looking for a light that brightens an entire room, or a relaxing nightlight, this moon lamp will be perfect for you. I switched to bottom view and created a sketch on the base (almost like the ceiling for the bottom section).
After our experts have made sure the designs are perfect they begin the process of printing them on our cutting edge, state of the art 3D printers. Each and every lamp takes around 26 hours to 3D print, and it is done so in one single piece.
Recommendations
I couldn't have done all this without help from my engineering teacher. I want to thank my wonderful teacher Ms. Berbawy for being patient with all the beginner mistakes that I made and encouraging me to challenge myself! Insert the DC connector into the metal ring at the bottom of the moon lamp to charge, the red or blue light is always on during the charging. Then I created a construction line from the center of the hole that leads to the cylinder to the hole in the wall of the base. I drew another 37mm line that is tangent to this line, connecting them to both sides of the circle. Use the coincident tool to make sure they are really attached to the circle.
Although the final product and designs that can be seen in the previous steps seem simple, I actually went through multiple versions of each part before achieving the finalized product due to being completely new to the design process and 3D printing. While I originally only had a very basic project consisting of the moon lithophane and a simple light, over the course of the project I improved my original plan by adding a base, cylinder, and LED lights that change color. Again, don't be afraid to improve your project throughout your working process! The Levitating Moon™ lamp floats above the base because of the magnetic force pushing the moon lamp away from the base.Our Original Moon Lamps are the only ones on the market with a realistic design and is FCC, CE, and RohS certified so you can rest assured that it’s tested, approved, and 100% safe! Then I extruded a cylinder from the sketches on the surface of the base. This cylinder should be at most 127mm long. If you had cut off too much of the moon in Meshmixer, make this cylinder even shorter. When I was designing my project, I wanted a sphere with a diameter of 6 inches (152.4mm) and a hole of 2 inches (50.8mm) so that the base and cylinder can be inserted inside. As you can see from above, this was designed so that the moon can fit on top of the base, which has a cylinder extruding from the middle where the LED lights can be wrapped around.
In recent years, technological advancements have given rise to innovative and mesmerizing lighting solutions. Among these captivating creations is the levitating moon lamp—an enchanting blend of art, science, and aesthetics. Then I added points to make the hole creation process (step 9) easier. I created another sketch on the surface of the extruded rectangle and added two construction lines 8mm from the side and 3mm from the top right. I repeat this step on the bottom left (the 3mm would now be from the bottom left) and made sure they are coincident. There is a picture of this above.The Original Moon Lamp can make the perfect gift to kids and adults alike. Treat your loved ones with this enchanting, calming and interactive piece of art. I used the Rotate tool to create the hollow base. Make sure the body is the sketch that was drawn in Step 1 and the rotational axis is the y-axis. For safety, I went over the rectangle and made sure that the two points at the bottom are connected to the side. Then I deleted the center construction line and finished the sketch.
Great Deal 
New Comment