AKORD 12mm x 12m Water White Plumbers PTFE Thread Seal Tape Plumbing Joint, 12mm x 0.075mm

Product Information

One important point to note is that Plumbers Mate should not be used in any areas where is it exposed to pressurised water. As it doesn’t set solid any exposure to pressurised water can easily just wash it straight out of the joint. Don’t use any more than 3 layers of PTFE tape on a given joint as this can cause leaks Which way do you Wrap PTFE Tape on a Joint? After you are done wrapping your thread sealant tape you can use a fingernail or the edge of the spool to chase the threads and flatten the tape. This will prevent any bunching or binding when you tighten up the pipe. When selecting a pipe sealant for use on hot and cold domestic plumbing systems in the UK ensure it is safe for use by confirming it conforms to BS 6956-5:1992.

One other point to note is that you should always use PTFE tape on the actual threaded male section of the joint and no where else, this is where it is designed to go. Find out how to measure plumbing pipe size easily and accurately with our free tool. This handy ruler will save you money and frustration!Apply plumber’s tape to shower head and arm connections to seal them. Shower heads and arms, which are the metal tubes that shower heads attach to, are another area that tend to have problems with leaky connections. Make sure to wrap all the male threads on new shower heads and shower arms 2-3 times with plumber’s tape before screwing them together. [7] X Research source Keep the first two threads of pipe free of any PTFE tape. This will allow the pipe to engage the fitting and easily start your connection. A few wraps of thread sealant tape is all it takes to make a leak-free connection! If you follow these steps, you’ll find that Teflon tape is a breeze to use and does its job well. As a product Plumbers Mate is more suited to preventing leaks in and around fixed objects rather than sealing up actual plumbing fittings.

Clean all threads: The first task is to clean everything fully and remove any dust, debris or grime that may be in any of the threads. The presence of even the tiniest spec of dust can cause a leak. Using a clean, lint-free wrag dust off any debris from in and around the threads of both sections of the joint. Where any heavy soiling is present you may need to use a specialist cleaning or degreasing product. The best tool to use is a wire brush or if you have one, like we have used here, a brass wire brush. For example, hold the pipe fitting horizontally in your left hand with the threads facing your right hand, then position the tape with the end facing down, so you will wrap the tape away from you. Ensure joints are clean, dry and free from any debris: Once you have cleaned off all the major crud and debris from your joints ensure they are fully dry as the presence of any moisture can cause leaks. Use a lint free cloth to remove any remaining dust and moisture and for a fine clean a can of compressed air (also known as an air duster) can blow away and remaining dust or moisture Robustly resistant to pressure, which makes it suitable for fuel injection systems and other high bar applications.When wrapping PTFE tape around a thread each revolution or layer should over lap the last one by roughly a half to ensure a good seal. Save frustration and embarrassment with our guide on the best toilet plunger you can buy. We will even show you how professionals unclog toilets! For products that actually create a seal in pipe joints products called “Jointing Compounds” should be used. Commonly known in the UK as “Portable Jointing Compound” and in the US often known as “Pipe Dope” these products are also used to help seal up threads in pipe joints. As you may have guessed from the opening line of this how-to guide, PTFE tape or “polytetrafluoroethylene” tape is known by numerous different names but regardless of what name it’s known to you as they all refer to the same product; PTFE tape.

Although it may seem that you can use PTFE sealant tape with pretty much any water, fuel or gas system, this isn’t quite the case however as pretty much all compression fitting manufacturers recommend it should not be used on any form of compression joint. With a compression joint, the watertight seal is created when the compression nut is tightened down. Introducing a substance such as PTFE tape into this can actually in some cases cause create leaks! One final very important point to be aware of is that you can indeed use both PTFE tape and also Plumbers Mate or another similar jointing compound together for the best and most comprehensive sealing solution. How to use PTFE Tape to Seal Pipe JointsAs prevention is certainly better than cure in this case, for any plumbing joints that are hidden or hard to reach such as those being kitchen units, it’s not a bad idea to add some PTFE tape to ensure no leaks occur at any point in the future as in most cases you’ll never find a leaking joint until the damage has already been done. Create a tight seal between water lines and sinks with plumber’s tape. Wrap plumber’s tape 2-3 times around the male threads of all the fittings underneath a newly-installed sink before you attach the water lines. This will ensure a tight seal so there aren’t any leaks when you’re running water from the faucet at high pressure. [6] X Research source