Homax 6100 Ceiling Texture Scraper,Black,12-Inch

Product Information

You don't have permission to access "http://www.homedepot.com/p/Homax-Ceiling-Texture-Scraper-for-Popcorn-Ceiling-Removal-6104/202061374" on this server.

Our next job is having a kitchen fitted at the end of July, and so we've been having quotes from plasterers to do the walls and ceilings. Every plasterer we've had has suggested scraping the artex (as it has pointy bits) and then plastering over, but I can't help thinking this is a bad idea considering the asbestos.

Popcorn ceiling removal is fairly easy, but it does require specific tools. Here's what you need.

You don't have permission to access "http://www.homedepot.ca/product/homax-popcorn-ceiling-texture-scraper-6204/1001076387" on this server. A: You can paint over artex, as the surface is textured you need a special type of tool and paint to do the job properly. Safety is key whilst removing this material, we will discuss safety shortly. This coating is not harmful if left untouched, as Artex is usually located on the ceilings it poses no risk whilst left undisturbed. If I remember rightly, the ceiling did take quite a few coats of paint to properly cover the filler on the ceiling. I can’t remember exactly, but I’m certain it was more than 3x coats! That said, I used a trade white paint which does tend to be a thinner consistency with less coverage. I used a roller mainly and just a brush for the edges.

Popcorn ceiling removal tools are best for unpainted popcorn ceilings or for ceiling painted with flat paint. Paint with any type of gloss (eggshell, satin, semi-gloss, or gloss) prevents the water from soaking in and loosening the popcorn texture. If the area is undamaged, you are able to source all your tools and materials and then begin the step by step process to remove the Artex. FAQs Q: How can I tell if there’s asbestos in artex? If your home was constructed between 1985-1999 then your home is less likely to contain asbestos in the artex. If your home was built after 1999 then the Artex in your home will not contain any asbestos. Do NOT hoover up asbestos. You need a HEPA type hoover for this. In fact, I would not advocate uncontrolled scraping of asbestos. We have a bedroom with large polystyrene sheets covering both the walls and ceiling but have then been wall papered over.

It is strongly advised you don’t break off any of the artex to send as a sample yourself, as you could risk exposure to harmful fibres.

Even if the artex in your home does not contain asbestos, the removal of this if sanded and scrapped can still cause dust, therefore it’s important to protect yourself fully before jumping in feet first. As the artex is classed as a textured surface you will need to use a roller with long hair such as a long sleeved mohair roller. Don’t be tempted to sand down the artex first as this can release asbestos particles and realise fibres that can become airborne and any inhalation can be damaging. Sources A: In short, yes you can! If the artex in your home is in good condition and there are no breakages then it is safe to cover the artex with plasterboard and skim over it with a fresh layer of plaster. As we have discussed the tools and safety equipment, it’s now time to look at the materials you will need to safely remove Artex from your walls or ceiling.

With difficult ceilings, it's often best to cover the popcorn texture with 1/4-inch or 1/2-inch drywall instead of removing it.