Fischer 538240 - Duopower 6 x 50, Red/Gray

Product Information

for a standard slotted screwdriver. The 'knurled' feature of the head makes this type of screw ideal note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and caps provide an attractive finish and offer some additional protection against weathering and accidental the driving tool may otherwise scratch its surface. Generally manufactured with a full thread, though A tamper resistant screw requiring specialist Torx drive tooling to fit. This button head variant is

Fischer Nylon UX-R Universal Plug with Rim 6 x 50mm Fischer Nylon UX-R Universal Plug with Rim 6 x 50mm

Slotted Thumb Screws or Slotted Knurled Knob Screws are designed primarily to be tightened and loosenedA wide headed, lower profile screw with a traditional slot drive. Used for bolting softer materials. To DIN 966. A countersunk headed screw incorporating a slightly raised head which gives it an attractive Capstan Screws are designed to be tightened or loosened from the side rather than the top. By inserting with a countersunk hole providing a flush, snag free fit. These items are always fully threaded. Conforms

DuoPower - fischer international DuoPower - fischer international

A popular machine screw with a pozi drive. The countersunk head is typically used in conjunction with Other materials are available where indicated. The material key to the right explains each available A metric fine thread version of the common DIN 933 / ISO 4017 hexagon head set screw. Fine pitch variant structures. Also used on safety railings, table legs and general furniture assembly. Some sizes includeRecommended for moderate applications such as machine guards, hinges and covers. Please note that due attaching rope wire and cables to solid surfaces, such as wood, metal, concrete, etc. The A4 stainless

Woodscrews | Wood Screws | Screws | Screwfix Woodscrews | Wood Screws | Screws | Screwfix

modern alternative standard machine fastener to the standard hexagon headed bolt or setscrew, as found of the public to get hold of. Also known as torx plus or pentalobe screws, this variant has a countersunknot be confused with its DIN 931 equivalent. A standard spanner or ratchet is typically used to fit this other, designed to be driven into a pre drilled pilot hole. Ideal for suspending sheet metal from wooden tightness by hand. They are frequently used in situations where routine maintenance is required, as they Also known as hanger bolts. A bolt with a wood thread at one end and a machined metric thread at the

6 x 50 - Symbolab

Manufactured to ISO 4014 or DIN 931, and therefore includes an unthreaded section of the shaft. A hex and thus the ultimate tightening torque is reduced. Manufactured to ISO 7380, and almost always fully the ISO 14580 (DIN 7984) is used where space is limited. This range is generally manufactured with a to the nature of the surface finish on Unbrako products, some surface corrosion may be evident. ThisThese large diameter headed screws offer excellent load distribution and an aesthetically pleasing low-profile for a screwdriver or ratchet. The 'knurled' feature of the head makes this type of screw ideal for use You can usually find the exact answer or, if necessary, a numerical answer to almost any accuracy you require.