LED Flasher Unit 3 Pin Relay LED Bulbs Fix Indicators flash rate plug & play CF13 JL-02

Product Information

Plug and play, even for a Caterham novice I got my indicators working immediately, and it’s future proof for the (inevitable) upgrades to LED lamps. A great price, and very fast delivery from a company dedicated to Caterham. A big thumbs up from me, thank you! As the difference in wattage between LED and standard indicators is generally quite large, it is recommended that you will need one resistors per indicator that you are changing. You can buy 25 watt resistors in pairs here. By adding resistors to the wiring you increase the wattage draw from the LED indicators to match what was there before, therefore your existing relay will continue to run as normal with a standard flash rate.

LED Flasher Unit Relay MKII - Just Add Lightness LED Flasher Unit Relay MKII - Just Add Lightness

IF THE RELAY DOES NOT BEHAVE WHEN THE ENGINE IS RUNNING YOU NEED TO ADD SUPPRESSION TO THE LEAD BETWEEN YOUR COIL AND DISTRIBUTOR TO REDUCE THE RF INTERFERENCE. Suitable for many other classic or modern 12v cars or applications with standard filament / incandescent bulbs or LEDs or a mix of filament / incandescent bulbs and LED. Fits all the Bonneville range carburettor models, Thruxton, T100, America, Speedmaster and Scrambler. Also fits EFI Bonneville range up to VIN 521668. Related products The red/white wires connect directly to the +12v positive connection on the battery after passing through the ignition switch and scooter main fuse so is a perfect place to take the power supply for our LED indicator. In the pictures above we have soldered the new wires on and then covered them with heatshrink tubing but you can use any method you wish provided it makes a secure insulated connection.Test your indicators for each resistor you fit to ensure that they are working correctly and to determine if any more are needed to further slow down the flash rate. Browse our range of Motorcycle Screens, Levers, Crash Protectors and Bodywork accessories. Double-Bubble screen replacements from Airblade, with three different smoked options-What more could you want? LED motorcycle indicators have a lot of benefits over the OE option, being smaller & lighter units, which allows the designs to be a lot more sharp and modern, plus giving a much brighter flash out on the road.

LED indicator relay | 1000RR - The CBR1000RR Fireblade Forum LED indicator relay | 1000RR - The CBR1000RR Fireblade Forum

Suitable for many classic or modern cars, motorcycles or applications with standard filament / incandescent bulbs or LEDs or a mix of filament / incandescent bulbs and LED.More importantly this conversion also enables you to fit an LED indicator relay as the indicator relay built into the Piaggio voltage regulator will not flash properly with LED indicators fitted. We have a 30-day return policy, which means you have 30 days after receiving your item to request a return. a) install resistors (extra solder joints, bulky, generate heat, waste power, weigh a little bit, look fugly)