Honeywell 7 Day Programmable Thermostat CM707

Product Information

Press the TEMP or buttons to change the factory setting. The display will flash indicating that a change has been made.

Try moving the lever to the Man end. You should feel resistance and the lever should return to the Auto end, with a whirring sound, when released. With its programmable functionality, the CM707 gives you the flexibility to create customized heating schedules that suit your lifestyle. By setting specific time periods and temperatures, you can ensure that your home is always at the optimal temperature when needed, helping to save on energy costs. The Honeywell CM707 is a programmable thermostat that allows users to easily control the heating and cooling of their homes. It features a sleek and modern design that blends well with any decor. The thermostat is specifically designed to provide comfort and energy efficiency, allowing users to set different temperatures for different times of the day. Can be adjusted up to 3 oC (default is 1.5 oC) to provide better temperature control (less overshoot).OFF mode has an integral frost protection setting at minimum 5°C (installer adjustable) so that pipes in the house will never freeze in winter.

In terms of compatibility, the Honeywell CM707 is compatible with most heating and cooling systems, including gas, oil, and electric systems. It also supports both 24-volt and millivolt systems. It is worth noting that the thermostat upstairs works as normal and will heat the radiators upstairs when it should do.Honeywell CM707 je programovatelný pokojový termostat navržen pro přesnou a kvalitní regulaci topného systému a zefektivnění celkového vytápění. Zabezpečuje tepelnou pohodu během vaší přítomnosti i v době kdy jste mimo domu a tím i úsporu energie.

On the boiler it is set to the Hot Water and Radiator mode, which it has always been. I have removed the batteries from both CM707's but it still carries on heating. It is like it is ignoring the downstairs Thermostat and just constantly heating the radiators. I have an issue with my heating and wondered if anyone could help/know of anything to try before i call someone out. When enabled the Pump Exercise will switch the relay on for 1 minute at 12:00 if the relay has not been switched on since 12:00 the previous day. I have just bought a tado smart thermostat + starter kit + Valve radiators. while going through installation videos i have got confused as all of the videos are showing either having 3/4 wires or N L L A B C type of wiring. My home wiring seems to be simpler, on further reading i understood that this one is a heating only furnace (excuse me if i am getting the terminology wrong).

The unit will display the first parameter of installer parameter group category 1 (from n.1 to n.19). At the end of each valve you will find a lever in a slot. labelled Auto at one end and Man at the other. The lever should be at the Auto end. Up to 4 daily independent time and temperature level changes let you set 4 time and temperatures pairs to suit your lifestyle.

The Honeywell CM707 Programable Room Thermostat is Part of the Honeywell controls range at PlumbArena. All settings held are the factory defaults. Changes to 0 when one of the parameter values are changed The problem i have is that the radiators downstairs are constantly on regardless of whether or not the thermostat is on manual, auto, or off. This started happening out of the blue yesterday. The normal upper temperature limit of 35 oC can be reduced down to 21 oC to save the homeowner energy.The CM707 thermostat can be mounted directly on the wall surface or on to an electrical wall box. WIRING