Mapei Ultracolor Plus Coloured Grout Terracotta 143

Product Information

Continue grouting in the same manner until every outdoor tile has been complete. It is a good idea to do a small section at a time so that the grout is spread evenly. Step 7: Buff away any grout haze As above, the sealer can be applied to the tiles before they are laid, or at least 12 hours before grouting the tiles. Ensure you shake the bottle well and apply the product in accordance with the instructions on the bottle. Remember if using a roller, brush or cloth they must be appropriately washed out with white spirit and then disposed of carefully. Do not leave them exposed to direct sunlight, as if linseed is allowed to dry on a roller, brush or cloth, it can become self-combustible. Claybrook Handmade Terracottatilesare produced from natural materials and clays, so will vary in tone, surface texture and size. The nature of the handmade production can mean that pitting and uneven edges are normal and part of the product’s character. Once you have let the grout set, you can buff the tiles using a microfiber cloth. This helps to remove any grout haze from the faces of the tiles. Step 8: Seal the grout

Apply the product generously and evenly to the face and edges of the tile and continue to saturate for 3-4 minutes moving the product continuously with the roller or brush to ensure complete coverage. Allow 2-4 hours between coats and apply a minimum of 3 coats to ensure a good seal before grouting.

Why Is Grouting Important For An Outdoor Patio?

For best results, the sealer should be applied after the tiles have been laid but prior to grouting. This means that not only are the tiles easier to grout but also the tile ceases to be porous and the grout will not penetrate the surface of the tile. Once the tiles are grouted, a second application should be made. The reasons for this are twofold: Before grouting, you must clean the grout joints, as always. But be extra careful with pavers, because one slip with the razor knife can lead to a deep scratch and a tile that must be replaced 1. All paver tiles must be sealed before grouting 2. The sealer prevents the grout color from moving into the faces of the pavers and slows down moisture absorption from the grout. Make sure the tile sealer is dry before going on to the next step. Both types of grout ideally require tile surface temperatures of at least 10 degrees Celsius and no more than 40 degrees Celsius. Dry application: Once the tiles are firmly secured and set, gently pre-wet the surface using a mist spray of water, avoid flooding the joint. This prevents the jointing staining the tiles. Open the brush in and pour the material along the joint, brushing it into the joint at the same time. As there is no water to wash the product into the joint, using this method with a pointing trowel and jointing iron will enable the material to be compressed into the joint. Top up the joint after compacting and repeat process till you achieve a suitable level.

Once a good seal is achieved leave the sealer to cure for a minimum of 12 hours to cure, before applying the Ironwax Satin/Gloss. Wet application– When the tiles are fixed using permeable bedding materials, brush in grout can be applied using the “Wet Application” Once the floor has been cleaned and dried apply Tile Doctor Seal & Go sealer with a paint-pad applicator and tray. terracotta tiles typically require between 6 and 8 coats of sealant, always allow to dry before applying the next coat. Maintenance Cleaning After treatement the solution should be rinsed off with water and removed with a wet vacuum. The floor should then be left to fully dry before applying a sealer. Sealing Terracotta Tiles For stubborn areas of heavy build-up of dirt or sealer we would recommend following up with NanoTech HBU (please ensure the tile is wetted before applying).Two main types of grout are applicable for outdoor use. The first is the standard cement-based grout, and the second is the brush in grout. Below are some of the pros and cons of both, which will help weigh up what is best for you. Rated for outdoor use Cement-based grout comes in powder form, which is added to water before being applied. The most common type of outdoor grout is sanded grout. This is used when grout joints are 1/8 inch or wider. First of all, before we get into either type of grout, it is important to note that both must be rated for outdoor use. If you use grout that is not suitable for the outdoors, it will not last and may damage the tiles. Cement-based grout This type of clay is not made to a great standard and thus the porosity levels between each tile can vary greatly, this makes them hard to clean, hard to seal and generally harder to maintain. UK Tile Doctors have been trained to cope with these issues however it should be noted even with the right equipment, products and experience no guarantee can be made on a satisfactory outcome of what we at Tile Doctor and a customer would call a great finish given the low quality of this product. Sealers will break down after 2-3 years (depending on usage and cleaning products used) so for regular cleaning use a sealer friendly cleaning product such as Neutral Tile Cleaner which has been especially formulated for the regular cleaning of Sealed Stone and Tile surfaces keeping them fresh with a pleasant lemon scent. Efflorescence

Once the Mattstone sealer has been allowed to fully cure (12 hours), apply 2 coats of Ironwax Satin/Gloss with an hour between coats. Then allow 4 hours for the finish to cure before starting the grouting process using Ardex FL grout. If the tiler is not using our recommended Ardex FL grout, then please test your chosen grout on the surface of a sample tile, to ensure the grout can be cleaned away successfully.

It neutralises any alkaline salts inherent in the floor thus preventing the build-up of Efflorescence which can be a problem with older floors. Any of the grout mentioned previously will work fine for any type of outdoor tile, including porcelain. Again the most important thing to remember is that the grout is rated for outdoor use. How long do you wait to wipe off grout? It’s important to keep the tiles clean whilst you apply grout. To do this, get a moist sponge and sponge frequently to clean the tiles without removing grout. Step 6: Grout the rest of the patio The other type of grout available for outdoor use is brush in grout. There are two different application methods for brush in grout: