Joined in 2023 
82 
63 About this deal
question: as I mentioned before, my motherboard is the old P8Z77-I Deluxe which provides only 1 CPU fan header and 1 Chassis fan header, so when I install the pump, by common sense I will connect the fan 4-pin cable to the CPU fan header. But I know there is a pump fan lead cable, to where I should hook it up?? Made some tries… first of all I cleaned the filters of my case (I found something I can barely assimilate to wool rather than dust), and that made me gain some degrees. Maximum coolant temperature in regard to the physical system limits? Or how much should you expect to see for your use? Unfortunately, this is likely as good as you can do. You haven't given your room temperature, but I can approximate the case ambient temperature from the drive and coolant data above. Ultimately, that is what really matters anyway. In addition to a 240mm radiator, the kit comes with Corsair's new AF Elite fans. These are high-performance 120mm PWM fluid dynamic bearing fans that combine a low-noise design with the company's 'AirGuide' technology for powerful cooling, quiet operation, and exceptional durability. They also support Zero RPM and Variable Pump Speed specialized cooling modes in iCUE to keep noise to a minimum when your system is idle or under light loads.
Hmm, yeah you're right. Using HWINFO64 I can see the temps up around 100C at max load, the CPU starts to thermal throttle at exactly 100C.
From there, proceed with your typical Hydro Series cooler installation (don't forget to plug in your power and USB cables). If you want to see diagrams or more detailed installation instructions, consult your cooler product manual. If you cannot find your product manual, you can use this manual for the H100i Platinum.
Since I changed the fans on the radiator and used I custom profile, I was worried about not using the AIO properly.
Throw Your Computer In The Ocean.
I got this image from guru3d review of the H60 . My motherboard doesn't have the CPU_OPT header. What do I do? Someone asked same question 4 years ago about 1 fan vs 2 fans on CPU cooler and one tested it with H80i cooler similar as your cooler.
Lian-Li introduced the new Galahad II Trinity series of AIO liquid coolers this year in a variety of models and configurations. If you are looking for something that offers great performance and sports plenty of RGB lighting, then the new Galahad II Trinity SL-INF 240 should satisfy your needs. This version comes with Lian-Li's SL-Infinity 120mm RGB fans that are just loaded with RGB lighting all around. It even comes with infinity mirror effects, on the main fan hub and both sides of the frame to give a unique look, and like most Lian-Li fans they can be daisy chained easily for better cable management. Even the pump-head can be customized with three deferent caps bundled in the box for a unique RGB look. https://www.corsair.com/us/en/Categories/Products/Liquid-Cooling/Single-Radiator-Liquid-Coolers/Hydro-Series™-H60-%282018%29-120mm-Liquid-CPU-Cooler/p/CW-9060036-WW I find out my H60 pump speed from a third party utility known as Speedfan. It is denoted as CPU Fan probably because the cable of the H60 is connected to my mobo's CPU fan header. It is 4299 rmp! Miraculously high!! Please note: For iCUE 4 on macOS, currently only HID and audio products (listed below under HID gaming peripherals) are supported. Secondly I switched the pump speed from silent to extreme and that caused the liquid T under normal browsing to fall down about 6-7 degrees. Maybe my fans profile is so "silent" that even the pump speed matters (usually it should not, or let's say "not so much").In Fortnite it gets up to about 80C. In normal use I doubt I would ever get to 100C and activate throttling, but interesting to know, thanks. I don't know why but in these days fans are reaching speeds (and noise) like they never did before… ambient temperature has risen but not to that level… and it's not my first summer in this house.
Great Deal 
New Comment