H18 Halogen Lamp 12 V 65 W PY26d-1 Blister

Product Information

EXTENSIVE RANGE OF QUALITY BULBS – Simply’s extensive range of automotive light bulbs are carefully created for a long-lasting, high performance quality driving experience, range from headlight to gas discharge, auxiliary, and chrome bulbs. Your driving needs and safety are our greatest concern. There is a German national regulation for vehicle bulbs, now superseded by international ECE regulations. Bulbs according to the old German regulation are still manufactured. The German regulation is contained in §22a, Subsection 1, No. 18 of the Straßenverkehrs-Zulassungs-Ordnung (StVZO, Road Traffic Approval Regulation). Per the Fahrzeugteileverordnung (FzTV, Vehicle Parts Regulation), such light bulbs must bear an approval mark consisting of a sine wave and the letter 'K'. The technical requirements themselves are established by standards produced by DIN. You can convert your regular halogen bulb to xenon with a special kit, but these are not road legal in the UK. Xenon headlights are a popular choice for luxury cars, using metals and heat gases to create a bright blue or white glow. LED bulbs can be more expensive than other car bulb types, but that’s off-set with the thousands of hours of trouble-free operation you can expect.

The H17 and H18 bulbs are smaller, more powerful halogen bulbs, while the H8, H9 and H11 are self-sealing bulbs that don’t have to sit inside a watertight unit, so they’re often used as foglights. In Canada, vehicle headlamps may use light sources (bulbs) conforming to either the US or the international ECE regulations. [8] :108(5)(a) Replaceable Light Sources for Vehicle Headlamps Bulb Type There are several different classifications for car bulbs. The United Nations (UN) has set international standards for classifying car bulbs. This helps to ensure that bulb types are standard across different countries.UN Regulation 37 covers motor vehicle filament lamps. These are categorized in three groups: those without general restriction that can be used in any application, those acceptable only for signalling lights (not for road illumination lamps), and those no longer allowable as light sources for new type approvals but still permitted for production as replacement parts. The H18 bulb, if anything, should run slightly cooler than the H9 bulb since the H18 doesn't pump nearly as many lumens as the H9 bulb. (Assuming identical luminous efficacies, which is a safe bet, given both are conventional halogen bulbs with no fancy IRR coatings or the like). Despite their similarities, each of these bulb types is slightly different. They differ in number of filaments, nominal power, and base type. We also offer a full range of OBC anti-error modules for LED kits, LED bulb-holder adapters, and waterproof covers for cars and motorcycles.

While the brightness and range of the light is impressive, xenon bulbs can dazzle other drivers and create glare. It's worth noting here that problems will mostly occur when switching between fittings. If you want to upgrade your bulbs, you shouldn't have any problems with any wattage or voltage change, unless you're installing an aftermarket kit. Upgrade bulbs from a reputable source such as PowerBulbs are perfectly safe to install and use. The addition of a blue coating to the bulb will turn the colour of the light to be more white. The downside to this is a small reduction in light intensity. Although xenons generally last much longer than halogen bulbs, their light output can decrease over time, so eventually they won’t emit enough light to be safe for night use. Some manufacturers therefore recommend replacing xenon bulbs every three years. UN Regulation 99 covers gas discharge light sources for use in vehicle headlamps. All light sources acceptable under Regulation 99 are also acceptable under US regulations.

The light produced is similar in brightness to that of a xenon bulb, and produce very little heat so they’re more efficient and therefore cheaper to run. These products do not have ECE approval and must not be used on public roads in any exterior application. Public roads use leads to cancellation of operating license and loss of insurance coverage. Several countries forbid sale and use of these products. Plus, the H18 was designed as a near-direct replacement for OEMs. Thermals are discussed, briefly, in this leaflet: Light bulbs for automobiles are made in several standardized series. Bulbs used for headlamps, turn signals and brake lamps may be required to comply with international and national regulations governing the types of lamps used. Other automotive lighting applications such as auxiliary lamps or interior lighting may not be regulated, but common types are used by many automotive manufacturers. LED bulbs are great for producing a light that is close to that of daylight and they offer less glare than other bulbs which means that they do not dazzle oncoming drivers.

More light allows to see farther and therefore react sooner. Signs, obstacles and hazards can be recognised soonerwhich covers light sources for high-intensity discharge headlamps. Some UN-approved bulb types [4] are also permitted by some other regulations, such as those of the United States or of Japan, though Japan has begun supplanting the former Japanese national regulations with the international UN regulations. UN Regulation 37 also provides guidelines on how each bulb type can be used. Bulbs are grouped into three categories. Group 1 can be used for anything, including headlights, tail lights, and more. Group 2 can be used for signalling lights, but not for bulbs that illuminate the road. Finally, Group 3 are lights that are no longer used on new vehicles but can be manufactured as replacements for older vehicles. Some bulbs have only one filament, but others have two. Also known as dual filament bulbs, these are used to power both the main and dipped beam of your headlights. One filament is dedicated to each purpose. This can be easier for drivers, as you only have one headlight bulb. Cars that use single filament need one bulb for the main and another for the dipped. On a serious note, 55 watt HID systems are even worse than any theoretical damage resulting from a 65-watt halogen bulb being used in place of a 55-watt halogen bulb. The beam pattern cannot be fixed by re-aiming. You’ll be able to spot these headlights easily on the road, thanks to their ice white/blue tint and extreme brightness.