Dulux Trade Diamond Glaze Gloss 1L

Product Information

Special precautions should be taken during surface preparation of pre-1970s painted surfaces as they may contain harmful lead

Make sure surfaces to be varnished are sound, clean and dry. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.New or bare wood: Sand the surface in the direction of the grain to remove any imperfections etc and remove residues with a damp lint free cloth. Stir thoroughly before you begin, taking care not to use a whipping motion, which will introduce air and cause foaming when applied. Light foot traffic is allowed after 24 hours but to prevent possible damage to floor while the full mechanical resistance develops, avoid heavy wear and do not replace carpet or rugs or move furniture for at least 7 days after application.

Surfaces should be protected from water, steam, spillages and hard stress, for example abrasion or polishing, for a minimum of 5 days after application. Seal all new or bare wood by applying one coat of Clear Gloss Diamond Glaze Varnish to help reduce absorbency variations, which can cause differences in colour and sheen. Wood dyes may be used prior to applying Diamond Glaze Varnish. It is recommended that a water- based dye be used.Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead. Before using coloured Diamond Glaze Varnish on base wood, pre-seal with a coat of Diamond Glaze Varnish Clear Gloss to minimise colour absorption differences. Wood stains or dyes may be used prior to applying Dulux Diamond Glaze Varnish. It is recommended that a water-based stain be used