Joined in 2023 
82 
63 About this deal
AnyCubic has come up with a simple lift on and off solution, it's not the most elegant solution that I've seen, but there's no faulting its effectiveness. Tilting models, adding rafts and supports is all required to gain the best results, but there's also an element of experimentation which for those new to resin printing, means that there's a steep learning curve. The LCD exposure screen features an anti-scratch protective film with a high light transmission that protects the screen from scratches and resin leakage, while still achieving high printing accuracy. An additional replacement protective film is included! At the heart of the machine is the new matrix UV light source that delivers 4K resolution for higher detailed prints. The 8.9-inch Monochrome LCD enables short layer exposure times, helping to boost those print speeds and detail.
The UV light used by resin printers is dangerous to human eyes, and therefore the print area must be covered by some protective shield. Within 15 calendar days of receiving the product request a return for an exchange, if the product does not match the original description of the product in one or more significant respects.
Software for 3D printers is essential to the success of the print, and here AnyCubic has designed a relatively simple and easy to understand solution. The UV power of a 3D printer is the intensity of the ultraviolet (UV) light source used to cure the resin during the printing process, and it is a measure of the energy delivered per unit area of resin. UV power is measured in watts per square centimeter (W/cm²) and determines the rate at which the resin cures. Higher UV power cures the resin faster and correspondingly faster print speeds. Different UV power levels will have an impact on the quality and efficiency of the print. Adjusting the UV power according to the needs is one of the practical printing skills. When printing transparent or translucent resin, the UV power can be adjusted between 45% and 50% to present better printing results.
Any faults or damages to the product are caused by unauthorized use or modification, including exposure to moisture, entry of foreign substances (water, oil, sand, etc.), or improper installation or operation. Using UV to expose prints is a technical process, and any fluctuations in temperature can affect the success of the print. Within the machines base is a complex cooling system to help regulate the machine and extend its usable life.
The Anycubic Photon Mono X 6Ks is a resin printer in a class of its own! In addition to a 9.1 inch 6K display and a large build volume of 195.84 x 122.4 x 200 mm, the printer impresses with its advanced and precise operation. Next, resin printing gets better with experience, and the more you use the software and learn the best way to apply supports, the more success you will have.
Damages caused by uncontrollable external factors, including fire, flood, strong winds, or lightning strikes. It's also worth doing this if you leave the resin sat in the vat for more than 24hours. More than 48 hours in the open and I found the resin should be disposed of. Final verdict The Photon Mono X 6Ks is equipped with a 9.1-inch HD monochrome display with a resolution of up to 5760 x 3600 pixels. With a contrast ratio of 380:1, sharp and finer details can be displayed. Within 30 calendar days of receiving the product request a return for an exchange, if the product suffers performance failure. Compared to a sand-blasted build platform, the laser-engraved build platform of the Photon Mono X 6Ks has better flatness and adhesion of the print models. Consequently, the possibility of detachment of the model is reduced and the printing success rate is improved!
FDM 3D Printers
The UV power of the machine is high. If there are solid reside in the resin vat or on the printing platform frequently, please decrease the UV power and increase the normal exposure time. Note: The warranty period for the LCD Screen of some machines has been extended from 3 months to 6 months. Effective models: Mono 2, Mono X 6Ks, Mono M5s, Mono M5 and LCD printers listed by Anycubic later. Technology Overall the print quality is exceptional, and comparing a print from this against an FFF 3D Printer and the print quality difference is easy to see. Layer markings are far less defined, and you can print much more complex models. Within 14 calendar days of receiving a product if the product has no manufacturing defect and is still in new condition.
Finally, what makes the Mono X stand out is the size of the print area. AnyCubic has designed the printer and resin vat in such a way to maximise the print area while keeping the amount required in the vat to a manageable amount. Set-up overview While, for the most part, it's plane sailing, there are a few quirks and a step learning process compared with FFF printing. Then the resin vat is then bolted in place, and it's just a case of following the brief instructions on screen, making sure the build plate is flat and then tightening the screws. You're now ready to print. The serial number of the defective product and/or visible evidence describing the defect may be required.
Introducing the Anycubic Photon Mono X: Elevate your 3D printing experience. Enjoy ultra-sharp details with the 8.9" 4K Monochrome LCD. The Matrix UV Light Source ensures rapid and precise prints, while the UV Cooling System enhances longevity. Upgraded design guarantees user-friendly operation. Unleash creativity with Anycubic Photon Mono X.
Great Deal 
New Comment