ValetPRO Dragon's Breath Wheel Cleaner for All Wheel Types - Removes Iron Fallout and Baked-on Brake Dust Remover - 1 L

Product Information

It will make your wheels bleed purple just like regular iron removers so you can tell when contamination is present. If you are using as a wheel cleaner then this wheel cleaner will almost make cleaning your wheels a touch-less process. Dragon’s Breath is a specialist pH neutral wheel cleaner that reacts with the iron contamination within brake dust to produce a brilliant red bleed from an otherwise colourless gel; showing you that it’s working. More importantly, this chemical reaction also turns iron into a water soluble solution which makes it easy to rinse away baked on brake dust. For the most part Dragon’s Breath will easily clean general road grime away without a need for agitation, however the stubborn baked on brake dust may still require some agitation for the best results. Directions: First use and appraisal: The donor vehicle was a 19 Year Audi A3 which had not been washed in over three months! It made the ideal test for the TROLL’S BREATH wheel cleaner – the ultimate wheel cleaning product. The end result was absolutely amazing and you can see from the photos that even the interior rim of the wheel has been cleaned effortlessly and they appear as good as new and in a showroom condition! These results were achieved in under ten minutes per wheel! Five minutes soaking, two to three minutes of agitation with a soft brush, and a rinse from the hose.

CarPro was the first to come to market with their innovative iron remove dedicated to the removal of fallout from all car exterior surfaces and made a strong presence onthe market..so strong it was primarily known for its ‘unique’smell. Their best iron remover remains true to this and is very effective at removing ferrous metal particles from paint, wheels & glass. The product was then liberally sprayed onto the bodywork of the vehicle and began its process of dissolving over three months of grime, dirt, bird droppings and the like, effortlessly. The vehicle was once again rinsed with a hose to neutralise the solution and helped prep the car for the next stage of the detailing process, Snow Foam.

I have used it on aluminium, painted aluminium and steel wheels and if you take care not to leave it on for more than 6 minutes no damage to the wheel is done.

Excellent value for money as 10 evenly distributed sprays will cover one of your cars wheels. However, if you do have sever iron contamination feel free to spray more liberally.This competition gives us two of the best iron removers for detailing and are both very good choices if you are looking for one to buy. The PRO-KLEEN TROLL’S BREATH immediately begins to turn a deep purple colour as it gets to work dissolving the brake dust particles. The more purple it goes, the more iron fallout is on the wheels. It naturally “pulls” in a downward direction under gravity, pulling iron contamination away from the wheels. Removing fallout use to require the use of oxalic acid to break down and break apart the ferrous metal from the affected surface, usually paint, wheels & glass but have now been developed so that you no longer require an acidic fallout remover but a completely safe PH neutral formula which is even more effective than its acidic rival. Dragon’s Breath is a specialist pH neutral wheel cleaner that reacts with the iron contamination within brake dust to produce a brilliant red bleed from an otherwise colourless gel; showing you that it’s working.