Makita HS0600/2 240V 270mm Circular Saw

Product Information

A blade’s geometry, such as the shape and angle of the teeth, affects how efficiently it can penetrate through different materials. Blades with larger gullets and more aggressive tooth profiles tend to have a greater cutting depth. Dewalt table saws can cut up to 3-⅛” (79.4mm) deep at 90 degrees and a maximum of 2-¼” (57.15mm) deep at 45 degrees. Meanwhile, those with a blade diameter of 8-¼” (209.55mm) can cut up to 2-9/16″ (65.1mm) deep at 90 degrees and about 1-¾” (44.45mm) deep at 45 degrees. Ridgid Table Saw Cut Depth

Adjusting the cut depth of your circular saw is a straightforward process that ensures you cut through your material cleanly without excess wear on your saw or blade. Bevel Capacity: This determines the saw’s ability to make angled cuts, which reduces the maximum cut depth compared to straight 90-degree cuts. If there is a blade already on it then it will have a size usually shown as something like 165mm x 20mm. The 165mm refers to the diameter of the blade and the 20mm refers to the bore size. See the diagram below for a clear illustration. Yes, but it will take more than one cut to do the job. That’s because there will still be ¼″ of the wood left after the first cut, so you will have to flip the board and cut again to go through the remaining material. All the other blades mentioned can go through the 2″ on a single cut. 8-inch and 9-inch SawsIf you’re working in a confined space, a mini circular saw can be indispensable and Einhell’s TC-CS is a great example. At just 2kg, it’s light and, with a handle roughly the same size as a grinder, it’s easy to hold. Furthermore, the quality of the materials used and the manufacturing techniques employed can affect the performance and longevity of the blade, ultimately affecting the cutting depth.

Extra Features: Most of us like some nice extra features and benefits to our power tools that the manufacturer has built in to help us get the job done safer etc.The same is true in case of a table saw, miter saw, and other similar power tools. 7 ¼″ Saw: How Deep Can a 7 ¼ Inch Circular Saw Cut? A 2×4 lumber piece actually measures 1.5 inches by 3.5 inches. To cut a 2×4, you can use a 6 1/2″ circular saw, which typically has a maximum depth of cut of about 2 1/8″ at 90 degrees, allowing you to cut through the 2×4 in a single pass. What is the depth of cut for a circular saw for a 4×4? Both the RTS12 and the RTS23 have 10″ (254mm) blades. They can cut a maximum of 2-½” (63.5mm) deep at a 45-degree angle and 3” (76.2mm) at a 90-degree cut angle. The compact RTS08 has a smaller blade size of 8-¼” (209.55mm) and comes with maximum cut depths of 1-⅝” (41.275mm)and 2-⅕” (55.88mm) for 45-degree and 90-degree cut angles, respectively. Does a Larger Blade Always Mean More Cut Depth? This is arguably the most common size for circular saw blades. The 7 ¼″ is large enough to handle most jobs while being small enough to be portable and lightweight.