Shelly Motion - disponibile da Aprile 2021 Wireless White

Product Information

Generation 1 “Shelly 4Pro” and “Shelly Sense” are not supported (devices based on old CoAP v1 protocol) IMPORTANT: The device heats up during charging, which prevents it from measuring the room temperature correctly. 2. Starting IMPORTANT: Enabling the Client mode will disable the AP mode. In case you need the AP mode again, press and hold the Reset button for 5 seconds. Press and hold the Reset button for 10 seconds to factory reset the Device. One battery-operated device delivers all that data that lasts up to a year on a single charge (Li-ion 3.7 V / 6500 mAh). As the device is straight from the production line, I can’t verify the claim, but I had it running for over a week now and it still reports 100%. That’s promising. What’s nice is the included USB-C port for easy charging.

Green brief flash: Unreported motion detection (the Device is not connected, or motion detection is disabled). IMPORTANT: If the Device has not been added into your Wi-Fi network in 3 minutes, it will switch off. Press briefly the Reset button to start it again. Pressing the Reset button while the Device is in AP mode will turn off the Device. 3. Inclusion to Shelly CloudCAUTION! Do not allow children to play with the buttons/switches connected to the Device. Keep the devices for remote control of Shelly (mobile phones, tablets, PCs) away from children! 4. Connecting manually to a local Wi-Fi network If the BUTTON TYPE of the switch connected to the device is set to momentary or detached switch, the integration creates an event entity for this switch. You can use this entity in your automations. Event entities (generation 2)

Set the blind time of the motion sensor in minutes (from 1 to 1440) after the last detected motion. Reveal the full potential of Shelly Motion by combining it with other devices from your home network. Set Shelly Motion to activate custom scenes based on hour, light, or various actions When motion is detected in any of the conditions below, the sensor will send a separate command when it disappears. The sensor will transmit a new movement after the blind time has elapsed after the last movement. Just like the original sensor, Shelly Motion2 is a WiFi-enabled sensor that links with a 2.4GHz network (or creates its own AP point for situations where wireless LAN isn’t possible). Shelly Motion 2 (left) vs Shelly Motion Other than the micro USB (hey guys what happened to USB-C?) and a reset pin, there are no other ways to interact with the device physically. WiFi protocol enables hub-less operation which is great for anyone just looking for an easy start and the well-developed app and web interface provide an array of interesting options. Shelly Motion – unique PIRThis document contains important technical and safety information about the device, its safety use and installation. Below the Main Controls heading, observe the current room temperature, Shelly Device battery as a percentage, and light status of the room. For battery-powered devices, the update platform entities only inform about the availability of firmware updates but are not able to trigger the update process.

All of that is probably due to the big 6500 mAh rechargeable battery that the Shelly Motion 2 is having. This battery can last up to 3 years in standby mode and up to 1 year and a half with 6 hours usage per day. If you choose to use the Device with the Shelly Cloud mobile application and Shelly Cloud service, instructions on how to connect the Device to the Cloud and control it through the Shelly App can be found in the Shelly Smart Control Guide. There are two generations of devices. Both generations are supported by this integration. There are some differences in how devices should be configured and in the naming of entities and devices between generations. Shelly device configuration (generation 1) Observe the room temperature chart at the bottom of this tab, which display the temperatures measured in the last 24 hours. Below the temperature chart, observe whether or not motion has been detected by the Shelly Device. The LED indicator behind the motion sensor lens ( C) will start flashing in red, green and blue sequentially for a while and then turn steady blue. The Device is now in AP (access point mode).Sunset / Sunrise: The Shelly device may turn on/off automatically at sunrise/sunset, or at a specified time Before/After Sunrise/Sunset. Select the time in hours and minutes from the dropdown menus. As usual, Shelly delivers in that department. I had said that before and say this again. Shelly knows how to combine interfaces for everyone’s satisfaction. Full cloud connectivity is available while using the app, while extra protocols like MQTT, CoAP, and REST are configurable via web GUI for anyone looking to direct the devices via the local network. What’s really cool about this sensor is the custom options. Shelly Motion can detect individual motions every 3 seconds. Obviously, this more than anyone would ever need, so you can customise the following settings: