Kreg KHI Concealed Hinge Jig, Blue

Product Information

Durability is assured by the cast-aluminum construction. For transportation, the jig is dismantled into two pieces, and it comes with a carrying case. A guide bush for the router cutter is included, though the cutter itself is not—rather disappointing given the Trend door hinge jig’s high price.

Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. TheKreg® Concealed Hinge Jig takes the guesswork out of drilling those holes, and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig.In addition to the 35mm offset cams, a pair of 26mm cams is also provided. These allow the BI-DTool jig to be used for smaller hinges, though the required cutter is not included. Unlike the Kreg, there is no scale on the edge to help with alignment. Additional clamps are required to hold the jig in position, but that’s typical of this kind of jig. A 1/16-inch drill is provided for retaining screw holes, though care is needed as this can easily cut into the plastic guides on the jig, thus reducing their accuracy. The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit. The guide above will prove useful in finding the right jig for full-size interior and exterior doors as well as cabinet doors. Those who want more info or clarification about these tools may well find it below in answers to some common questions about door hinge jigs. Q. Is there a tool to cut out door hinges?

Kreg, one of the world’s leading jig makers, does not disappoint with this high-quality precision cabinet door hinge jig. It is made from tough glass-filled nylon and designed to cut holes for standard 35mm cabinet hinges (often called Euro hinges). Cabinet hinge jigs almost always include the Forstner bit required to drill the flat-bottomed hole for the main body of the hinge. They may also include a smaller drill for the retaining screws. Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. The Kreg Concealed Hinge Jig takes the guesswork out of drilling those holes, and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig. The Everbilt jig is basically an L-shaped piece of transparent plastic that is held against the door edge. Holes allow pencil marks to be made for the hinge and retaining screws. The jig is then put aside and the relevant holes drilled. Any adjustment for offset will need to be done manually, which could lead to errors creeping in.A heavy door (often called a solid core door) should have a minimum of three hinges to spread the load and prevent it from dropping. In extreme cases, such as large oak external doors, four hinges may be necessary. Q. What kind of router do I need for door hinges? A router bit is required with full-size door hinge jigs, and one is often included. Shank size will be either ¼ inch or ½ inch. Neither is better than the other, but the size will determine the kind of router used. Some ½-inch routers include a ¼-inch collet as an option, whereas ¼-inch routers cannot use ½-inch bits.

The jig can flex if too much pressure is applied when routing, so care is needed. Unfortunately, the included router bit is not very good and soon loses sharpness. Those with numerous doors to hang may wish to invest in a better cutter.

See what others are building with Kreg Tools!

TheKreg® Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, theKreg® Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit. It is easy to be critical, but for a one-off job, or for someone who has a pillar drill to set depth, the Everbilt does the job at a fraction of the price of most competitors. The Concealed Hinge Jig consists of a glass-filled nylon base with a hole that receives a drill guide. Indexing cams ensure that the jig positions the bit to drill a hole at the required offset — which is dictated by each hinge — and a built-in stop collar ensures that the cup depth is correct every time. There are even holes that you can use to guide a bit for hinge screw holes. The Concealed Hinge Jig comes with a high-quality, carbide tipped bit to ensure great results.