HTVRONT Auto Press, Heat Press | 38cm x 38cm (15" x 15") Heat Plate | Heats up to 210°C (410°F) | Professional Heat Press for Iron On HTV Vinyl(White)

Product Information

Once the iron on vinyl has been properly applied it is ready for wearing, using, and laundering. Allow the adhesive to cure for at least 24 hours before washing. Once it has cured, it can be washed and dried. For best results, wash inside out with cold water and hang to dry or tumble dry on low. To really get good pressure, I prefer to use an ironing pad like this one on a sturdy table instead of a folding ironing board. You can also try putting a wooden cutting board on your table. How to Iron

There are so many HTV options on the market these days. Whether you're looking for glitters, metallics, or other unique HTV designs, there's something out there for everyone. But don't forget that HTV works best under specific temperature settings; read through this article to familiarize yourself with HTV heat press temperatures. All HTV (with the exception of HTV that is printed onto using inks), must have the carrier sheet placed down onto the matt. The setting "mirror" then needs to be applied. Once you instruct the machine to start cutting, the machine will cut into the adhesive side of the vinyl.Suitable for cotton, polyester, mixtures of polyester/cotton and polyester/acrylic or similar textiles. (Stretch Metallic is also suitable for application to Lycra) The soul of any printer lies within its sublimation ink. This vital component enables the seamless printing of an ext... Solution 1: When printing multiple layers of vinyl on shirts, make sure all HTVs have the same characteristics. All vinyl layers should be hot peel, warm peel or cold peel. Have you ever marvelled at the vibrant, eye-catching designs adorn various products like mugs, apparel,... As a crafter, I believe that all of you have used so many kinds of crafting material. For example: regular heat t...

Do you like doing creative projects and want to decorate your clothes or accessories? If yes, you can try using iron-... Your HTV transfer has a pre-made guide that will be transferred onto your product at the end of pressing. Each of these machines has its own shut-off method to alert you when your project is done. And, as with the MPress, you know you are getting a machine that has been tested, gone through a quality control process, and comes with access to support.

Heat Presses & Accessories

Well.1.Set heat press to 320°F or 160°C. You can go up to 340°F if you want more puffy result. Place the vinyl design onto your garment at the desired location. And use HIGH PRESSURE, heat and press the puff heat transfer vinyl design for ten seconds.2.Polyester HTV can be printed at 270 degrees Fahrenheit with light pressure. Always pre-test your HTV before using it on an actual project. Erika Bryans July 7, 2023