Sealey BM24RS Rubber Floor Squeegee with Wooden Handle, 600mm, Brown

Product Information

The sponge head folds up and sits on elevated feet for storage so it won’t stay damp and end up mouldy. Green: Medium Hard Blade. Suggested mesh count is 77T plus. Ideal for textile and other substrate printing, finer detailed artwork and harsh solvent based inks. Suitable for Plastisol, Water Based, Paper & Board / Vinyl’s / Solvent Inks. Ideal for smoother surfaces. The negatives are something which we have had to learn over time. Our main criticism revolves around the squeegee blade. Firstly the blade which comes with the squeegee handle is too soft so immediately you need to change that out. Secondly the blade is designed to hang slightly over each edge of the handle, as the original blade is too soft, this creates a dragging defect on each side of your screen. WPS Wooden Squeegee Range – Long lasting, cost effective and easy to use. Wooden Squeegees which are actually made of treated MDF. You can choose from the list below which Squeegee blade is the best for you.

Red: Soft Blade. Suggested mesh count is 15T-55T. Ideal for textile printing and high opaque designs especially light onto dark printing. Suitable for Plastisol Inks.A window cleaner or tiled surface needs to be a soft foam maybe with an added rubber scraper for removing excess moisture.

For more hard-wearing surfaces (like concrete) you’ll want to consider a rubber floor squeegee as these tend to be a bit more hard-wearing. The Chemical Hut has produced this heavy duty squeegee and it should handle tougher surfaces without any complaints.If it’s concrete or paving slabs then a heavy-duty rubber is required to ensure the head doesn’t wear away after a few uses. Cost Blue: XX Hard Blade. Suggested mesh count is 120T-200T. Ideal for substrate printing including paper, board, metal, ceramics and glass printing. This blade gives a good amount of pressure to increase definition to your artwork. It also limits the deposit of ink which is great for non absorbent surfaces and extreme solvent based inks. Ideal for photographic work and fine lines. Suitable for most inks and for non absorbent surfaces. With all the different rooms in your home, it can be a bit of a nightmare to find the correct tools for cleaning everything properly. A vacuum cleaner may work well on dry surfaces but what about wet areas?

The double foam lip is scratch free and can be used on any surface from laminate to wooden floors, wet room floors, and even heavy duty floors like in the garage or patio. The double foam wiper will be sure to remove all water and there is a non-slip rubber handle for ease of use. The negatives are minimal but if we must think of something that annoys us about this squeegee it would be the noise it makes during a print run. I can’t put this into words so please watch our YouTube video where we will demonstrate this little irritant in full. Before we get into the details, I want to point out that there is no right or wrong squeegee and these results are purely based on the experience we have with each squeegee handle over a long period of time. Each handle is scored using the same criteria; The positives of EZ Grip squeegee is that you can easily change the blade in house which will save time and money. Additionally the handles are moulded perfectly to your hand creating a very comfortable printing experience.Best for Textile Printing – We recommend 65 Red if printing onto dark garments. We recommend 75 Green for printing onto light garments and for general purpose printing. Be cautious when using any product on your vehicle if it doesn’t specify that it’s safe to do so. If the material is slightly rough you can end up scratching the paintwork which is very expensive to fix. Only use products on a car that are designed for the job. Should I put the head in the dishwasher?