Warehousing and storage: a guide to health and safety (HSG76): HSG76 / HSG 76 (Health and safety guidance, HSG76 / HSG 76)

Product Information

A comprehensive online collection of construction related standards, regulations, technical advice and articles Where possible, you should locate storage areas away from watercourses and sensitive perimeters (for example, those close to public rights of way, housing or schools). You must store all waste within the secure area of your facility to prevent unauthorised access and vandalism.

The latest articles and guides from NBS subject specialists and construction industry contributors. The HSE and The Storage Equipment Manufacturers’ Association (SEMA) advise looking at the following areas to uncover potential problems. No, it’s not. That’s what HSE means when they say “you are free to take other action”. However, HSE go on to state that “if you do follow the guidance you will normally be doing enough to comply with the law”.You should store aluminium canisters separately from steel canisters (especially rusting canisters). This will: When loading and offloading odorous, flammable or volatile liquids between bulk storage tanks and tankers, you must use vapour balance lines to transfer the displaced vapours from the receiving vessel to the vessel you are pumping from. You must not carry out activities that represent a clear fire risk within any storage area. Examples include: You must direct overflow pipes to a contained drainage system (for example the relevant secondary containment) or to another vessel where suitable control measures are in place.

You must be able to close all connections to vessels, tanks and secondary containment via suitable valves. You must fit a valve close to the tank if you have bottom outlets, and have at least 2 isolation points in case of valve failure.All containers that need them should have a lid or bung, and the lid or bung must be closed except when the container is being sampled, having waste added into it or having waste removed from it. have tanker connection points within the bund where possible – if not possible you must provide adequate containment for spillages or leakage HSG137: Health risk management: A practical guide for managers in small and medium-sized enterprises HSG158: Flame arresters: Preventing the spread of fires and explosions in equipment that contains flammable gases and vapours The regulations as they are haven’t changed since HSE published its HSG76 guidance document in 2007. A lot of that HSE guidance document is based on EU Directive EN 15635, including the part about an expert inspection at least once every 12 months.

any special provisions relevant to that batch or load including minimising odour and other fugitive emissions You must have systems in place to make sure that loading, unloading and storage are safe, considering any associated risks. This can include: The list of HSGs is being constantly updated as HSE seeks to improve the standards of its guidelines. As such, there are some gaps between numbers. For example, there is an HSG173 and an HSG175, but there is no HSG174. You must have measures in place to make sure that couplings are a correct fit. This will prevent couplings from loosening or becoming detached. You should provide, maintain and clean your own couplings and hoses to guarantee their integrity and fitness. You should also: You must handle and store containers so that the label is easily visible and continues to be legible.

HSG166: Formula for health and safety: Guidance for small and medium-sized firms in the chemical industry You must not overfill containers used to store canisters. Overfilling can result in canisters being actuated and discharging their contents, either: You must make sure that transfers into and from tankers only take place in bunded areas designed to contain a worst case spillage. You must have emergency storage for leaking vehicles to minimise any acute incidents caused by a seal on a tanker failing. With thousands of work-related injuries recorded in the warehousing, storage and road-haulage sectors every year, regular inspection of storage equipment is essential to ensure employees’ safety, says Alex Ashcroft. The most trusted BIM Library in the UK, certified to the internationally-recognised NBS BIM Object Standard

Ensure that all workers who operate moving vehicles are properly trained, maintain appropriate speed limits, and follow best practices when it comes to vehicle safety. It is also vital to service and maintain vehicles correctly, and maximise visibility for drivers with the correct mirror set up, especially when manoeuvring and reversing. 2. Slips, trips and falls You must store all waste containers in a way that allows easy inspection. You must maintain safe access, with a gap of at least 0.7m between rows of bulk containers or palletised wastes.You must make a record of any spillages. You must retain spillages within the bunded areas and collect them promptly using, for example, pumps or absorbents. As such, post-Brexit, HSE could completely overhaul HSG76. Yet, this isn’t likely to happen, as there are no calls for HSE to do so. Instead, what is likely to happen is that all existing HSE legislation will remain the same. You should, where applicable and based on a recorded risk assessment, make inert the atmosphere of tanks containing organic liquid waste with a flashpoint less than 21°C. This can be done, for example, by using nitrogen gas. Under cover storage provides better protection for containers than open air storage and minimises the generation of contaminated water. Covered storage also: have programmed engineering inspections (extending to water testing if structural integrity is in doubt)