JUMPERS

Product Information

The CT2810 is another strange card in that it shares its FCC ID with the CT2290 range, but has the ViBRA-16 chip the same as the CT2260. But unlike the CT2260, the CT2810 gets an IDE CD-ROM interface. Open your computer and locate the CD-ROM and each of the cables connected to it. Below is an example of a disc drive, including where each of the cables should connect to the drive. CT2770A then followed, removing these obsolete CD-ROM interface headers from the board as well as the CSP/ASP chip area. The CT2919 was the non-"Value Edition" version of this card, designed for the OEM market. More Images

CT2830 is similar to the CT2700 and even the original CT1740 Sound Blaster 16, in that it has a real Yamaha OPL3 chip, has the same DSP and even still supports a CSP/ASP chip. It comes with an IDE CD-ROM interface. The Sound Blaster 16 Value is perfect as a low cost solution to crystal clear CD quality sound. It features the new IDE interface for connection to any compatible CD-ROM drive.

Opening the computer

Following the success of the CT2260 and its first ViBRA-16 card, the CT2800 or Sound Blaster Vibra 16S, uses an updated chip - the ViBRA 16S (CT2504). The CT2230, full name Sound Blaster 16 MCD ASP (Multi-CD with ASP chip) was the first of the 2nd-generation Sound Blaster 16 cards. Like the 1st-gen CT1750 it got

Marc Sven Schulte informed me of the fact the DAC chip on these cards is sometimes the AK4501-VS by Asahi Kasei Microelectronics (AKM) and not the Creative-branded CT1701-T. It's possible Creative simply took this third-party DAC and got permission to rebrand it. More Images Board revision 29417 got either the old CT1745A mixer chip from the first generation, or the newer CT1745-S. Board revision 49432 got the even later CT1745A-S.CT2771 is an odd card with no information anywhere on the web - let me know if you have any details of this card. Other Creative cards often used the '1' suffix to indicate it was a "value" version of the "0"-suffixed card, so this is perhaps a "value" on top of a "value" card ;-) Either that, or it's some OEM variant. Board revision 29409 was the original CT2770 and still had the other CD-ROM interface solder pads for Mitsumi and Sony drives, plus the CSP/ASP chip solder pads. Whether you're heading to the office, meeting friends for a casual outing, or enjoying a cozy evening at home, the CD Jumper is a stylish choice. Pair it with jeans for a relaxed yet chic look or dress it up with tailored pants for a more polished ensemble. We recommend when installing a CD-R (compact disc recordable) or CD-RW (compact disc re-writable) drive that the drive be set up as the primary drive on the second IDE/EIDE interface. Having the drive as the primary helps prevent buffer underruns when creating a CD. Attach cables The CT2230 and CT2290 seem to be the most loved SB16s because they offer the lowest noise output of all the SB16 cards and are not Plug & Play. This is good because we retro gamers like to have our choices at the hardware level! Plug & Play was in its infancy in 1994, and would make configuring your card almost impossible outside of Windows.