Cisco Meraki MR36-HW WLAN Access Point - White

Product Information

To mount your APon a drop ceiling T-rail, use the included drop ceiling mounting accessory kit. The accessory kit can be used to mount to most 9/16”, 15/16” or 1 ½” T-rails. The kit contains:

Do not throw in the device with household waste. The technical equipment is subject to storage and disposal in accordance with the organization's disposal procedure. Due to the reasons stated above, please do not downgrade the network with MR44 APs to 27.5/27.5.1 or lower firmware if they are being powered on by 802.3af (PoE) switch/power injector. Disposal of a technical device at the end of its service life should be carried out in accordance with the requirements of all state regulations and laws. The MR36 provides a maximum of 1.7 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing. Power consumption: 30W max (802.3af). Note: actual power consumption may vary depending on the AP and switch port usage.The 5 GHz 4x4:4 radio and 2.4 GHz 4x4:4 radio offer a combined dual–radio aggregate frame rate of 3.5 Gbps, with up to 2,402 Mbps in the 5 GHz band and 1,147 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR46 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP. If your access point still does not connect, the following instructions may be useful, depending on your issue.

Static IPs are assigned using the local web server on each AP. The following procedure describes how to set the static IP: If the SKU of a product is not shown below, then the announcement for the end-of-sale and end-of-support for the productmay not havebeen made yet. ProductAn integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR36 enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies. Automatic cloud-based RF optimization and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80MHz channels (802.11ax) Industry standard QoS features are built-in and easy to configure. Wireless MultiMedia (WMM) access categories, 802.1p, and DSCP standards support all ensure important applications get prioritised correctly, not only on the MR46, but on other devices in the network. Unscheduled Automatic Power Save Delivery (U-APSD) and Target Wait Time features in 802.11ax (WiFi 6) clients ensure minimal battery drain on wireless VoIP phones. The MR36 APattaches to the mount cradle with two tabs on the cradle that insert into the MR36 AP and is secured to the cradle using one screw. The equipment is subject to installation and maintenance by specialists with the appropriate qualifications, sufficient specialized knowledge, and skills.

With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR36 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video.You’ll need to obtain new licenses before your old licenses expire to continue using this Meraki product. If you choose not to renew, you will no longer be able to manage this product via the Meraki cloud, and this product will cease to function. Co-termination licensing means that when you request new licenses for your devices, the terms of your new and existing licenses will be averaged together so that all of your licenses will expire on the same date. Warning: Please ensure that MR44 is connected to an 802.3at-capable (PoE+) switch/powerinjector during the initial installation ORensure that the network the MR44 is added to is set to MR 27.6or newer firmware. Encryption Algorithm: AES, TLS, TTLS, TKIP, WPA, WPA2-PSK, WPA2-Enterprise, WEP, EAP-SIM, WPA3-Enterprise, WPA3-Personal, WPA3-Enhanced Open