Cromapol Acrylic Waterproofing Coating Grey - 5 KG

Product Information

If you’ve previously read a Cromapol review online, you’ll know that this product only needs to be applied in one coat to withstand ponding effectively. The covering average is usually 1 kg to 2 kg per square metre. The drying time is up to 72 hours, depending on the temperature, so your results may vary. When placed in good storage conditions within original unopened containers, the Cromapol Acrylic Waterproofing Roof Coating by Cromar has a shelf life of 12 months.

It can be used on wet or dry surfaces, meaning you can apply it in damp weather or when rain is forecast. A layer of Cromapol acrylic roof coating paint typically takes 72 hours to cure and dry, but it will still protect against water ingress, even when it hasn’t cured. With both 20kg and 5kg tubs available, this waterproofing roof coating is perfect for virtually any roof size. With over 10% off at the time of this article being published, you can also make mega savings on your flat roof repair. It is important to note that this product is classified as a potentially hazardous item and should always be stored safely, in a cool, dry and secure place, out of reach of children. Cromapol Acrylic Waterproofing Roof Coating is known for its durability and longevity. The exact duration of its effectiveness can vary depending on factors such as the application, environmental conditions, and maintenance. Typically, Cromapol has a lifespan of 10 years or more.

Solseal Delivery Schedule

Cromapol requires no primer on most surfaces with the exception of asphalt or bitumen for which a coat of Cromar CP Primer available separately) is recommended. Once used, this waterproof coating is not adversely impacted by extreme temperatures. This is due to its ability to reflect UV energy. This ensures the Cromapol coating does not warp or discolour. Please note: Whilst Cromapol can be walked on, it is not suitable for anything more than occasional, light foot traffic.

Applying Cromapol will ensure pooling water does not penetrate the roof. Many people also add a layer of Cromapol over lead flashing and near guttering to provide an additional layer or protection. Buy Cromapol Acrylic Roof Coating The Cromapol Acrylic Waterproofing Roof Coating by Cromar will not wash off while curing and will waterproof instantly, even when wet. It is a very flexible product that can be used for emergency repairs and long-term applications. Cromapol roof coating is designed to provide a high level of water resistance on flat and pitched roofs. It is ideal to apply a layer of Cromapol to a flat roof after summer because the heat from the sun can cause minor deformities to occur in the roof. This can result in water pooling on the roof, which can lead to a wide array of damp issues and structural problems that are costly to fix.Under optimal storage conditions in sealed original containers, our product maintains its quality for a period of 12 months. No, Cromapol acrylic roof coating does not typically require a separate primer. It is designed to be a standalone product that can adhere directly to roofing materials. However, in some cases, priming might be recommended for improved adhesion on porous or damaged surfaces. These application instructions are for guidance only and do not constitute any warranty of product performance.

Cromapol is suitable forgeneral waterproofing and sealing of roofs, pitched surfaces & for sealing flashings Cromapol will tolerate damp surfaces although as with any application for best results Cromar recommend applying to a dry surface.

Cromapol Acrylic Roof Coating from Cromar

Cromapol only demands a single coat to be effective, with 1kg – 2kg being necessary per square meter. This does not only reduce the labour involved, but also brings the cost of your entire project down. Application: Flat and Pitched Roofs, Roof Lights, Flashings, Fibre Cement Sheeting, Gutters, Slate, Asphalt, Lead, Metal and Roofing Felt