Bosch Home and Garden router POF 1200 AE (1200 W, in carton packaging)

Product Information

However, the good news stops there. The build of the machine is not up to the standard of competitor professional machines, with reports that some of the plastic controls can break off if they are not handled with great care. The plunge mechanism can also be a little temperamental, jamming if pressure is not applied evenly across the router when plunging. The RP0900X router is also a relatively low-powered router using only a 900W electric motor to power a single rotational speed of 27,000rpm. It comes with a collet for 1/4-inch router bits but can also accept a 3/8-inch collet. However, the usefulness of the larger collet size is debatable given that router bits with this shank size are not particularly common. Importantly, the Makita router will not accept a 1/2-inch collet or 1/2-inch router bits, nor does it have the power to run these larger bits effectively. So anyone planning to use this Makita machine for heavier routing, such as cutting kitchen worktops or similar, should look elsewhere. Overall, the DeWalt DWE625 is a very good precision router as one might expect from a premium power tool company and given the cost of the machine. Although it is not a router to turn away from and diehard fans of DeWalt tools will likely be happy with it, overall build quality could be slightly better especially when compared to similar priced premium routers from other well-established power tool brands.

The DWE625 is DeWalt’s contribution to the 1/2” router category. Unsurprisingly for this premium power tool company, the DWE625 is an expensive tool but with a lot of good features. First and foremost, it comes with collets for both 1/4” and 1/2” router bits, particularly useful if you are already using a 1/4” router and have a selection of router bits that you would like to use in the DeWalt router as well. It has a powerful 2000W motor with electronic speed control meaning that the speed of the motor will be maintained no matter how tough a wood you throw at it or if one overdoes the hand pressure when routing. The DeWalt motor also has soft start to prevent any inadvertent movement at start up, important both for safety as well as for routing accuracy. The motor speed itself can also be adjusted anywhere from 8,000 to 20,000 RPM using a dial at the top of the machine, useful for setting the ideal cutting speed for the material being cut. With a weight of 5.6 kg, it's heavy enough to be stable but not so heavy that it's tiring to operate. This is an excellent router to use if you are learning woodworking; the weight is about where it should be for a 1600 Watt router. Like other ½ inch routers, it comes with both ¼ and ½ inch collets so that one can use either size of bit. The ability to use both bit sizes is convenient. This is the maximum movement down (usually given in mm) that the router bit can travel. Obviously, the greater the degree of plunge travel, the greater the depth to which the router bit can sink into the workpiece, and the more versatile the router. However, don't assume that plunge travel equals plunge depth into the workpiece, as this will depend on the overall length of the router bit used and the degree to which it is level with the base plate of the router in the rest position. Router WeightThe power of an electric router (given in Watts) goes hand-in-hand with the maximum size of router bit that it is able to accept and the maximum depth of cut the power router is able to make. Typically, routers with wattages of less than 1500W will not accept the bigger router bits that have a 1/2-inch shank. These lower powered routers are for lighter work and more precision cutting. Routers that accept 1/2-inch-shanked router bits will have enough power to handle just about anything you can throw at them. Router-Table Compatibility

One other notable issue some users of the Hikoki M12VE router have flagged is that router bits can sometimes be difficult to remove from the collet after routing, on occasion necessitating the use of more extreme methods of extracting the bits (such as pliers), and sometimes damaging the bits in the process. Some users have clarified the need to fully unscrew the nut that holds the bit within the collet, but this appears to be only a partial solution, working for some users and not others.

More Views

GOF 130, GOF 900, GOF 900 A, GOF 900 ACE, GOF 900 CE, GOF 1250 LCE Professional, POF 800 ACE, POF 1100 AE, POF 1200 AE, POF 1300 ACE, POF 1400 ACE The 124799 has a fine depth adjustment, variable speed control and a soft-start, and comes with 5 different collets (1/4", 1/2", 8mm, 10mm, and 12mm), two different guide bushes, parallel, circular and roller guides as well as a measurement bar all within a reasonable-quality plastic case.