Blackmagic Design BM-BDLKDVQDHDMI4K Internal PCIe Video Capturing Device

Product Information

PCIe capture card with 4 HDMI inputs for capturing up to 4 different SD, HD, Ultra HD and 4K formats at the same time bit RGB 4:4:4 in all modes up to 4Kp30 DCI and 8, 10-bit YUV 4:2:2 and 4:2:0 in all modes. 8‑bit RGB 4:4:4 in all DVImodes. SMPTE 292M, SMPTE 259M, SMPTE 296M, SMPTE 372M, SMPTE 425M, SMPTE 2081, ITU-R BT.656 and ITU-R BT.601. SDI Metadata Support DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI, 4Kp95.90 DCI, 4Kp96 DCI, 4Kp100 DCI, 4Kp119.88 DCI, 4Kp120 DCI HDMI 2.0a supports Deep Color and HDR. Automatically configures to connected display. HDMI Resolution

Computer Interface: PCI Express 8 lane generation 3, compatible with 8 and 16 lane PCI Express slots Fantastic news, thanks! I have the Caldigit TS4 hub (amazing but expensive), so this will work well. Channels unbalanced. Analog outputs 3 and 4 can switch to AES/EBU outputs for audio 3 & 4 and 5 & 6 output. This provides a total of 6 AES/EBU output audio channels when using this feature. SDI Audio Inputs HDMI and SDI video connections are switchable between SD/HD/2K and UHD. Component analog video connections are switchable between SD and HD. Copy ProtectionDCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI, 4Kp95.90 DCI, 4Kp96 DCI, 4Kp100 DCI, 4Kp119.88 DCI, 4Kp120 DCI 8K Video Standards and of course, that shows the kernel module is loaded, but for completeness I can also see that directly:

HDMI 2.0b supports Deep Color and HDR. Automatically configures to connected display. Multiple Rate SupportCompatible operating systems: Mac Mojave 10.14, Mac Catalina 10.15 or higher / Windows 8.1 and 10, both 64 bit / Linux bit RGB 4:4:4 in all modes up to 4Kp30 DCI and 8, 10-bit YUV 4:2:2 in all modes. 8-bit YUV 4:2:0 in Ultra HD and 4K DCI 50p and 60p. 8‑bit RGB 4:4:4 in all DVI modes. Color Space I have installed Desktop Video 12.3.1 in the hope of running my UltraStudio Express (Something I have done with previous Macbooks and previous versions of Desktop Video without issue) The ultra studio will enable a grading monitor being used in apps like resolve and others which support the US3G et al. You will not be able to use that monitor as an ordinary monitor in macOS though.

DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI*, 4Kp48 DCI*, 4Kp50 DCI, 4Kp59.94 DCI, 4Kp60 DCI My 'system report' identifies the UltraStudio in the Thuderbolt/USB4 port and provides the below detail... DCI, 2Kp24 DCI, 2Kp25 DCI, 2Kp29.97 DCI, 2Kp30 DCI, 2Kp47.95 DCI, 2Kp48 DCI, 2Kp50 DCI , 2Kp59.94 DCI, 2Kp60 DCI, 2Kp95.90 DCI, 2Kp96 DCI, 2Kp100 DCI, 2Kp119.88 DCI, 2Kp120 DCI HDMI and SDI video connections are switchable between SD/HD/2K and 4K. Component analog video connections are switchable between SD and HD. Copy ProtectionPCI Express card for simultaneous capture of four different HDMI sources in any combination of SD, HD, Ultra HD, 4K and computer formats SMPTE259M, SMPTE274M, SMPTE292M, SMPTE296M, SMPTE372M, SMPTE424M, SMPTE425M, SMPTE2036‑1, SMPTE2048‑1, SMPTE2081‑10, SMPTE2081‑11, SMPTE2081‑12, SMPTE2082‑10, SMPTE2082‑11, SMPTE2082‑12 andSMPTEST2108‑1 This behavior is echoed by the command line updaters that I came across. Running the firmware updater (on all four devices in turn):