Joined in 2023 
82 
63 About this deal
It's a brilliant little tool. I've had it in the tool bag for a couple of weeks now, and the last job that I was just doing, with loads of LED tape, I couldn't do without it. The smaller stranded cable, I was literally pulling and it was pulling the end off and giving a nice clean cut without damaging the inner cores. Step 4 – Remove Cut Sheath: Withdraw the cable from the tool and then simply pull the cut sheath off and away This stripper is designed to both cut and strip 8 to 20 AWG-sized solid wire and stranded wires between 10 and 22 AWG. It’s able to strip smaller gauge wire with a minimum of damage because of the precision-machined stripper holes. It also uses a tension loader that doesn’t need to clamp the wire with excessive force, which also helps avoid breaking wires.
Wire strippers are an essential tool for any electrician or mechanical engineer. Wire strippers create a neat and tidy cut to reveal wires, ready to be soldered or have a connector attached. Types of wire strippers The stripping blade I thought would penetrate too deeply and score all the way to the core when stripping long lengths but I have yet been able to make it do so. Step 1 – Mark Strip Point: First, measure and mark the length of cable that needs to be stripped on the outer sheath Wide Compatibility: The electric motor powers drill-driven technology, while the adjustable blades and rollers fit all wire sizes with diameters from 1.5 mm (0.06”) up to 25 mm (1”). The ergonomic design makes the Ideal Twin & Earth Stripper easy and comfortable to use with minimal pressure required to complete a clean cut for any flat cables between 0.75 and 2.5 mm2 and up to 12 mm wide. Users simply insert the required length of cable into the tool and squeeze the handles together. The open-throat design allows an unlimited strip length for both the outer sheath and the inner wire sheathing. The tool’s specially hardened and tempered steel blades ensure an accurate cut and an extended service life, making it an excellent investment.An old accepted trade method was to simply grip the earth wire and tear it out of the insulation to split the ends open. Klein’s 11063W model is an automatic wire stripper that can remove up to an inch of insulation with a single motion. The alternative to using this tool is to slice very carefully around the circumference of the outer sheath with a hobby knife. Apply enough pressure (with either the stripper of the blade) to just cut into the sheath. Then bend the sheath a couple of times until it splits and you can see the wires inside. Pull the sheath off. Key points faster than conventional SWA stripping methods armour is scored to a uniform depth for a clean break off and trouble free gland connection automatic cable clamp provides constant pressure, making retightening a thing of the past The grip is spring-loaded and designed for long-term use. The chassis has a heavy-duty design that includes an Ecoat corrosion-resistant finish.
Adjustable stripper - self-adjusting stripper with the ability to crimp, strip and snip wires. Designed with precision and made to last. I would still recommend everyone to have them in there tool bag as they are handy when the cable comes out a wall and your unable to get a close strip with conventional cutters. Step 2 – Insert Cable: Insert the cable in to the correct hole and position the cut line in the centre of the hole, just below the cutting/stripping blade If you need any additional assistance when it comes to staying safe when working on and around electrics, see our electrical safety project here. Tools and Materials Needed for Stripping Cable
Why would you need wire strippers?
The term “wire stripper” refers to a type of hand tool used by production workers and electricians to assemble and repair wiring.
Great Deal 
New Comment