276°
Posted 20 hours ago

FIDECO M.2 NVME SATA SSD Enclosure, PCIe USB 3.2, Gen2 SSD Adapter with 10Gbps Transfer Rate, Hard Drive Enclosure for 2230 2242 2260 2280 M.2 NVME/SATA SSD of M-Key or M+B Key, Support UASP

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Based on these two observations I can say the enclosure itself is USB3.2 Gen 2 (10Gbps) capable on both USB-A and USB-C, but it will deliver that speed only if you have similarly capable USB ports. Another reviewer mentioned that they achieved higher speeds in their USB-C port, but that person had experienced slower USB-A speeds. It could be the SX8200 that's the issue, as it doesn't work with the Envoy Express. I just want a consistent TB3 drive, that's faster than the Envoy TB3 Express with the Intel P660, which is super stable (had it for 6 months with no issues). The Envoy Express might actually be the best bet, as it only uses 2 lanes, and doesn't get as hot as the Orico (and many other 40 Gb/s TB3 drives).

Which form factor? You have to get an SSD enclosure that matches the physical size of your drive. If you have a 2.5-inch hard drive or SSD, get a 2.5-inch SATA enclosure. For a 3.5-inch hard drive, you’ll need a 3.5-inch SATA enclosure. M.2 SSDs require M.2 enclosures, but be careful if your SSD is shorter than the standard 2280 (80mm size); most but not all enclosures have mounting screws for the shorter sizes. Also, if you plan to use an M.2 SATA SSD, as opposed to an NVMe one, make sure that the enclosure supports that standard instead (or in addition), because most M.2 enclosures are NVMe only. The SHE-C325 isn’t the most attractive enclosure on the market, but it does use mostly aluminum casing (the left part near the USB port is plastic) and at 4.5 x 1.5 x 0.4 inches, it’s pretty portable. SSK’s enclosure also comes with a thermal pad to help send heat to the aluminum casing, but you’ll only want to use it if your SSD doesn’t have a built-in heat spreader.The fastest enclosure we've tested, the ZikeDrive uses an ASMedia ASM2464 controller to deliver USB 4 read speeds that are 20 percent faster than we've seen on the competition. Write speeds were less impressive, but still strong in most scenarios. However, the ZikeDrive doesn't make the best list yet, because it's part of an IndieGoGo campaign and not available for general sale. The other USB-A port and USB-C port in my laptop only achieved 400-450 MB/s read write speeds. So I guess one of my laptop USB ports capable of 3.2Gen2 while other two ports are only 3.2Gen1. This is one of the most performant 10 Gbps enclosures and one of the most convenient, thanks to a tool-free design that allows you to slip the cover off by pressing a spring-loaded switch. It's a few dollars more than the Sabrent EC-SNVE at present and we prefer that enclosure's flip-up lid to the Plugble's slide-out one. On a few M.2 enclosures, including the SSK SHE-C325, we found that our test Kingston Rage Fury SSD’s built-in graphene heat spreader, which adds 3.5mm of z height to the drive, didn’t leave much vertical clearance. However, the SHE-C325 could close anyway, without scraping the drive’s surface. Considering that many M.2 SSDs have built-in, non-removable heat spreaders, every enclosure should accommodate them. The Orico’s M2PV-C3’s design is less polarizing than that of the SSK SHE-C325, but it actually uses cheaper materials, as the top panel is ridged aluminum but the sides and bottom are ABS plastic.

Using this with a Samsung PM961 (960 EVO OEM drive) and I can push 1000 MB/s reads and writes through this enclosure sustained. The enclosure uses a Realtek RTL9210B-CG chipset, which I suppose is one of the better ones. I also have a couple Orico drives with fans, but those are just overkill and mostly for show. They do work, just big and require tools to swap drives.Type C and Type A interface】FIDECO ssd enclosure designed with two kinds interface: type C and type A interface both side can be inserted; It also equipped with a USB Type-C cable help you connect with different ports more convenient.This hard drive enclosure adopts aluminum alloy shell, slim and durable; Ventilation holes designed on both sides featuring excellent heat dissipation. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy. The all-aluminum chassis has ridges to help with heat dissipation and it comes with both a thermal pad you can put on top of your SSD to keep it cool under prolonged loads. It’s a rather attractive silver enclosure that has a small cutout / handle area you can use for threading through a carabiner. Based on other review comments and my experience I can surely say this enclosure is capable of USB3.2 Gen2 (10Gbps) Speeds if your computer is not running on energy saving mode.

Compact aluminium housing, compatible with a variety of sizes of M.2 PCIe/NGFF SSD (30mm / 42mm / 60mm / 80mm). it´s for both RTL9210 and RTL9210B Chipsets dumped the current fw info with MPTool, made sure to change all parameters in *.cfg file RTL9210B_CG_Lite.cfg to match the original fw dumped info and finally commented the DISK_IPS_THRES entry. In all instances the enclosure runs quite cool, slightly warm in the hand. The only thing annoying is the enclosure RGB lighting which stays on all the time. In all instances the enclosure is attached to the thunderbolt port of all devices.Installing an SSD is pretty easy as you just need to unscrew the cover, attach the M.2 drive along with the optional cooling pad, screw in the mounting screw and reattach the cover. Unfortunately, both the cover and the mounting screw are 5-point star shaped screws, which are not very common. However, there’s a screwdriver in the box. There’s also a small, built-in battery that provides 5-10 seconds (depending on which model you get) of service time in the event of a power failure. That brief window of time might be enough to allow the drive to finish writing some data and avoid corrupting your drive in the event of an ill-timed unplugging. The Sabrent EC-USASP has an on / off switch, something you won’t find on most SSD enclosures but a nice convenience if you want to leave it plugged in but only power it on when you need it. Most 2.5-inch SATA enclosures have USB 3.0 micro B as their output port and come with USB Type-A to micro B cables. However, the EC-USASP has a USB 3 Type-A port (5 Gbps) and comes with a Type-A to Type-A cable. So, if you are planning to connect the enclosure to a laptop that has only Type-C ports, you can use a USB Type-A to Type-C cable (something many people have lying around the house) to do so. This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. The enclosure itself is pretty neat, easy to install the SSD and the USB-C side works pretty much as advertised. The USB-A side however, is much slower than the USB-C side. I've attached two CrystalDiskMark results, the one with the highest numbers is USB-C and the other is USB-A. Both tests were carried out on a high-end PC. The SSD used was an Aorus NVME 256GB with DRAM.

The only iffy part is that the enclosure slides together and is only stopped by a thin piece of plastic that looks fragile. At least they give you a spare in the box. M.2 NVMe and SATA SSD Compatible】FIDECO SSD Enclosure can support M.2 NVME SSD with M-Key and B+M Key, and M.2 SATA SSD with B+M Key. It can support the mainstream M.2 SSD and please note that it cannot support AHCI protocol SSD.ASUS ROG Strix Arion enclosure (USB3.2 Gen 2 capable of 10Gbps) and a 2TB PNY XLR8 CS3030 formatted to AFP M.2 NVMe and SATA SSD Compatible】FIDECO M.2 SSD Enclosure support two kinds SSD: NVMe M-Key/B+M Key M.2 SSD and SATA NGFF B Key/B+M Key M.2 SSD. It is applicable to size 2242/2260/2280 solid state drivers. Such as Samsung / Toshiba / Crucial / Kingston / Seagate / WD / Integral / PNY etc. How fast? Enclosures can only handle as much speed as their USB ports and the USB ports on your computer allow. Most 2.5-inch and 3.5-inch hard drive / SSD enclosures operate under standard 5 Gbps USB (USB 3 / 3.1 or 3.2 Gen 1). Most M.2 SSD enclosures operate at 10 Gbps (aka USB 3.1 or USB 3.2 Gen 2). High Speed】 This ssd enclosure connects your NVMe or SATA SSD to a USB-C Gen 2 or Thunderbolt 3 port at USB 3.2 Gen 2 10Gbps speeds. Capable of performance over 800MB/s read/write when using high performance NVMe media. One HD movie transfer only takes few seconds. It might be that to conserve power, the ports on the M1's are indeed underpowered, dunno. Also, I cannot plug 2 TB3 drives in my M1 Air at tha same time. doesn't mount whatever I do.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment