autoglym snow foam kit
*
276°
Posted 20 hours ago

Autoglym Polar Blaster Snow Foam Lance, Car Wash Foam Gun For Pressure Washer Application

£15.645£31.29Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Polar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car. Compared to a standard car wash shampoo, snow foam is designed to be used as a pre-wash solution. This means that it loosens and removes dirt before washing your car with a wash mitt. The purpose of this is that it helps to reduce the chances of introducing swirl marks onto the paint as there will be very little dirt left on the car. After testing several formulas, we found that the best snow foam is the Autoglym Polar Blast, which produces high-density foam that clings to the paintwork for far longer and effectively prewashes your car. However, if you want a snow foam that offers better value, the Pro-Kleen Cherry (as pictured above from our testing) is the best alternative. The Polar Blaster is a foam cannon that can be attached to domestic pressure washes to enhance the foam levels and user experience of the three products in the Autoglym Polar range. It fixes to the lance and comes with a bottle reservoir that contains the dilute product, negating the need to place a fill pipe in the product bottle.

Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on. One of the strongest cleaning snow foams we have used to date. Clearly lifted soiling and made removal of soiling significantly easier. The Polar Blaster has been designed and tested to be used specifically with the three Autoglym Polar products. It will enhance their foam levels, dwell time and coverage. div>


Screw the Foam Gun Head (B) onto the Polar reservoir bottle (D) and attach the Polar Blaster to your pressure washer lance. data-src="https://cdn.media.amplience.net/i/washford/haluk-car-cleaning-spot1-step3-process-winter21-1382x867" Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam. We recommend starting with a snow foam like Polar Blast to gently loosen dirt, and follow with Polar Wash to remove any dirt or contamination on your paintwork. Spray Polar Seal onto the clean, wet vehicle, ensuring all exterior surfaces are covered, although avoid direct application to the windscreen.

a>

No. The Polar Blaster has been developed for use with pressure washers only, a hose will not have the required pressure or the right connector. Thoroughly rinse and dry your car to reveal a high-gloss finish that is protected with a hydrophobic coating. The car must be dried with a cloth and not allowed to air dry as water spotting may occur. Every snow foam is a little different, but in essence they’re all pH-neutral cleaning solutions that, as the name suggests, will cover your car in a dense white foamy layer. You cover the car from tip to toe – including glass, plastic trim and the wheels – and leave it to do its work. How long depends on the instructions, but is usually somewhere between five and 15 minutes. Enough for a cup of tea, in other words. We would not recommend agitation as part of a pre-wash process. Allow the product to dwell on the paintwork for up to 10 minutes. This will allow Polar Blast to safely soften and loosen soiling, before rinsing with your pressure washer. Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.This really is dependent on several factors including the level of foam you would like to achieve, the settings of your pressure washer and the hardness of water in your area. Use the maximum foam setting when using the Polar products. However, it is possible to rinse the Polar Blaster through between uses by turning the foaming adjustment off. Depending on your needs, snow foams generally come in two forms, for a less aggressive treatment, UF Ultimate Snow Foam is ideal if you have an existing wax or sealant on the vehicle which you are keen to protect, not remove. Alternatively, if you require a little more bite, using a snow foam such as Auto Finesse Avalanche is recommended. It is still completely safe to use on all surfaces of course, but is specially designed to strip heavily soiled vehicles. If your vehicle only has very light soiling and you are using in place of shampoo. Please rinse vehicle first before applying Polar Blast. You can either allow to dwell and rinse without agitation or agitate with a sponge or wash mitt prior to rinsing. Like any good pre-wash, when you rinse it off, the cleaning agents in the foam will have worked away at the grime and makes the subsequent task of washing easier and more successful.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment