300Bar 4500Psi Pcp Compressor Electric Air Compressor for air Rifles Paintball Tank 220V TUXING

Product Information

Of course, there is the issue of warm air expanding, so with everything warming during the charging process, you might see a small drop in pressure when everything cools and settles. Close inspection and monitoring will tell you if the gauge needs to be pre-set just a little higher to take this ‘settling’ into account, and if that’s the case, it’s easily done, given the small drop-down marker on the gauge. Of course, this small element of trial and error, in the interests of being ultra-precise, is at the outset. Thereafter, with the gauge finely set, precise fills should be guaranteed. After filling, use the air bleed valve to purge the hose before disconnecting the rifle. The pressureregulated auto-shutdown will already have reset the ON/OFF button, so all that remains is to shut down the electronics with the POWER/RESET button. The inverter cooling fan will continue to run until you disconnect the power cable. In the field NEVER use this device for SCUBA tanks or other pressurised air used for breathing without specialised training and equipment to ensure that it is fully safe to do so. Using this device's pressurised air without adequate filtration can allow dangerous pollutants and chemicals such as carbon monoxide to build up to potentially lethal levels."

Airgun Charging Cylinders and Tanks over 4 Litres can be filled over a few sessions if allowing the cylinder and the compressor to fully cool to room temperature between filling sessions. Please note that the fill pressure will reduce as the air in the cylinder cools down after filling. This is quite normal, simply top-up the cylinder again once it has fully cooled down.Before the unit is used to actually fill a rifle for the very first time, the manual tells you to test the device to ensure it’s working correctly and nothing has come loose during transit, and for this you’ll need the stopwatch function on your phone. The new unit also benefits from our continuous improvement in R & D, including the new super durable Shuttle Valve, which we made from some quite exotic material.

All this has also been achieved whilst keeping The EVO at the same RRP as the EC-3000, a true feat of engineering! The EVO has a number of changes and improvements in how the compressor works, including some great new features, making the Hill Compressor even more reliable, durable and with a better user experience. One really great feature the machine offers is the ability to pre-set the desired fill pressure, which can be anything up to 310 bar. Other lighting modes will tell you if the battery is too hot to be charged and whether the battery or charger are defective. It took around 30 minutes to charge each of the two batteries out of the box, and there was another musical reminder that charging was complete.

Air Gun Finance in 3 easy steps

A sustained red light means the battery is charging anywhere from 0% to 80%, while a red and green light appearing together means the battery is between 80% and 100%, and a sustained green light means charging is complete. For those of you who don’t want to have to deal with or carry around a heavy piece of kit, then this hand pump could be the perfect alternative. It’s far cheaper than its rivals, and even though, as you would expect, it comes with far fewer functions and isn’t quite as high performance, when compared to the price of the other compressors on this list it can still get the job done. BUY NOW We've expanded our delivery team to make buying air rifles online: cheaper, faster and more convenient than ever.

The Silicone Oil (Clear) is used all the time by the pump and should need replacing after approximately 50 hours of run time, this is also the correct point to change the Crank Oil. When the device reaches the set pressure it will automatically stop filling. This is set simply by turning a dial on the pressure gauge at the top of the machine. The circular scale is graduated in psi on the outside and bar on the inside, and being British I’d have preferred it the other way round, but it’s fairly easy to read regardless. The brass pointer is quite large, so I’d err on the side of caution and set the pointer to underfill slightly until you get used to where to set it to get the exact fill pressure you’re after. If you fancy the car battery route, then follow as above, but this time, select ‘DC12V’ on the red switch, then connect the two ‘jump lead’ cables to the plus, and the minus terminals on the car’s battery. Keep the car engine running whilst the operation is carried out, too, as with jump starting, especially if you have an iffy car battery, so as not to run down the battery in any way. It’s completely free, and you won’t need to break any of the social distancing rules to collect your gun – keeping you safe and saving you money.The EVO also benefits from completely new electronic architecture along with completely new software, as with all Hill products the electronics have been designed and tested in house by their own software, and electronics engineers, and believe it or not the PCB’s are manufactured in Sheffield too. In operation, the load reading will typically be 22-24. At 29, the pump will shut down automatically. Excessive load can be the result of trying to fill an over-sized cylinder, overheating the system by running it for over 15 minutes straight, insufficient lubrication, or mechanical issues. The first three issues are easily avoided, and doing so should prevent the last one.