Joined in 2023 
82 
63 About this deal
Behind them are the knurled nuts which are used for all AMD and Intel installations, as they lock the head unit to the motherboard.
So I took the cooler off, saw a great paste spread but went ahead and took everything back off, cleaned, and reinstalled it all. Sorry, for that small side note of a correction I did get the wrong number but that doesn't effect my main point at all RPM for RPM which you can choose to run at whatever speed you like on either setup you will gain around 5 degrees C which dosn't translate into very much silence or performance gain. The radiator fans were intaking from the front resulting in a nice flow from front to back, although there was positive pressure in this configuration. In addition, current water and core temperature are also given here, and it is even possible to switch between different profiles.I wanted to know if an air cooler could manage to outperform the Kraken X62 so I threw a Cooler Master Hyper 212x air cooler and then reran the tests. Registered office: Klarna UK Limited, 7th Floor, 33 Cavendish Square, London, W1G 0PW, United Kingdom. We've seen and tested many of them as Corsair, Asetek, Cooler Master and yes NZXT and so on all have interesting kits. On a more basic level, NZXT chose to go with the idea of basing performance on pump speed in the Kraken Series. The fan produces a noise level that ranges from 21 to 38 dB, providing a balance between cooling performance and noise reduction.
That's the Corsair SP fans on the H100iv2 you're looking at, and indeed they are hampered by unbearable fan noise whenever you crank them up.
The next step to take is to move the adjustable ends on the Intel backplate to the inner spot for this LGA115X motherboard.
After removing the plastic cover that protects the copper cold plate and pre-applied time, we get a clear view of what is under the head unit There are four screws which will need to be removed if you want to use this on AMD motherboards, and we see that the TIM is evenly applied and debris free. Initially, we see that the radiator on this unit is 175mm long, it is 143mm wide, and is 30mm thick, as this is a 280mm liquid cooler. In this image, we have the LGA2011 and 2011-V3 standoffs and the LGA115X and LGA1366 standoffs in the front. Users can fine-tune settings for performance using the advanced controls to optimize their gaming sessions. Give your cooling extra flair with the X62’s on-board lighting, with advanced RGB modes and infinite-mirror effect.The cooler features two individually addressable RGB channels and our signature infinite-mirror effect for stunning lighting, using CAM’s intuitive controls. I recently purchased a ryzen 7 5800x3d processor for my old kraken x62 cooler that I bought 6 years ago. This is higher than ambient, but it is to be expected, the i7 8700K does put off a fair amount of heat, especially when overclocked, even at idle.
The center of the cold plate is the high point, and there are circular machining marks left in the copper from when it was shaped at the Asetek factory. Most recently though I was given an X99 custom desktop with an i7-5820k that I used to replace my i7-4770k setup. Use of these and any missed payments may affect your ability to obtain credit from Klarna and other lenders. The second thing to mention is that the length of the tubing of the Kraken coolers is longer than most, and on the X62 it is nearly sixteen inches long. Even though NZXT mentions a RAM clearance limitation of 35mm, there is enough play in the mounting system, which you can slide the head unit toward the rear I/O a millimeter or two, and eliminate any issues that the swivel fittings may have caused when using tall memory on the motherboard.however replacing the Noctua fans that come on a Noctua cooler with Phanteks SP models can reduce thermals by as much as 6C at same rpm. I tried the curve optimizer negative 30 offset all cores and it gave slightly higher temperature but with advantage of it boosting to 4.
Great Deal 
New Comment