DeWalt DWS5022 1.5m Guide Rail for DWS520 Plunge Saws & DWS5031 Router Adapter

Product Information

We take intellectual property concerns very seriously, but many of these problems can be resolved directly by the parties involved. I have used a straight edge in the past but I have a project coming up where I'll need to cut down quite a few sheets of material and a guide rail would make this much easier.

I am not suggesting youy use woodscrews however the guy who owned my old Fordson tractor before me would definitely have done so! Festool guides rails are compatiable with Makita,use to have a handy chart show who fitted who,can't find it.Combatible with the following DeWalt tools: Bestselling DCW604 Brushless Cordless 1/4" Router / D26204 / D26203 / DW615 / DW621 / DW622 / DW625. Some of the technologies we use are necessary for critical functions like security and site integrity, account authentication, security and privacy preferences, internal site usage and maintenance data, and to make the site work correctly for browsing and transactions. This adapter is designed to work with most circular saws which base plate has curled up edges or ribs that can be used to clamp adapter. The base looks more robust on the Dewalt to me as the Makita looks to be quite thin sheet metal, vs the Dewalts cast base.

The other thing is that whilst the Scheppach is at the lower end of the plunge saw market it gets really good reviews especially from the contributors on here and won't have any awkwardness of a saw running on an adaptor. Guide Rails Information Guide rails are used to cut or carve exceptionally accurate straight lines with handheld power tools. The anti-friction base and replaceable non-slip strip on underside of rail ensure solid performance.It came with some plastic attachments that allow it to fix to a guide rail which DeWalt no longer make. All the top manufacturers produce guide rail systems to help professional tradespeople and DIYers alike make precise and quick cuts to achieve the best possible results. Tools must be registered online on Dewalt Power Tools Warranty Registration Page to qualify for the warranty extension otherwise a standard 1 year warranty will apply. I think the newer DeWalt circular saws (not plunge saw) like the one HDC83 linked to have a groove mounded into the base of the saw also allowing it to run on a track.

Also this only utilises two of the three holes in the dewalt base, probably good enough for a one off but not ideal, drilling new holes is the way to go. As my saw was purchased before plunge saws were common I suspect the guide rail dimensions are probably not similar to todays plunge saws. It sounds like it should fit the dewalt and my smaller trend routers and definitely fits the Bosch and Mafell guide rails. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).Would use the Makita guide rails, but there other makes which fit Makita adaptor plate, could be Triton,can't remember. Here’s the size of the current dewalt guide rails the outer most guide would be for when it’s angled at 45 or less. Turning off the personalised advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive. Ideally, drill the base out with new holes with countersinks for the M6 set screws, there is enough meat to do it. Without these technologies, things like personalised recommendations, your account preferences, or localisation may not work correctly.

Once attached the base slides nicely on the rail, the depth adjuster work on one side and the clamp to stop it moving works on the other and if you move the depth adjuster control while its clamped it does twist a little bit so not perfect. circular saw track, ideal for cutting 8x4 ft sheet materials and is made from a strong and sturdy 6063 T5 Aluminium Alloy.I'm trying to find a guide rail (from any manufacturer) that the saw will fit onto, but I'm struggling to get dimensions for the profile of many guide rails. Cutting with hand-held circular saw results in wavy edge that looks bad and may cause problems later on. If you’d like to file an allegation of infringement, you’ll need to follow the process described in our Copyright and Intellectual Property Policy.