Rycal Block Paving and Concrete Sealer 20Ltr

Product Information

Therefore allow at least 2 weeks between cleaning and application of sealant to allow to dry out and to check for reappearance. This is because unlike cheaper water-based alternatives, our brick driveway sealant provides genuine long-term protection. Luckily, Kingfisher have you covered with a brick driveway sealant that will enhance appearance and resistance. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .

If you want the sanded joints between the gaps in the paving to be set solid, then work on low coverage rates for the sealer of about 2 m2 per litre. Please note – solvent based sealants may “bloom” should damp or moisture be present before full cure has taken place.

We use cookies to personalise content and ads, to provide social media features and to analyse our traffic. You can be assured that ourj sealers have the best discount and costs for patio and driveway protection.

If efflorescence is visible ensure it is treated with efflorescence remover, then wash down thoroughly with clean water. Allow to dry thoroughly (a minimum of 3-4 days of completely dry weather) and re-apply jointing sand prior to sealant application. SmartSeal Block Paving Sealer has been developed to combat the constant problems of staining and weed growth and to enhance the colour and aesthetic appeal of new or mature block paving or flagstones.If you have a photograph to support your query, please attach it as this will help us to provide a solution**. Should it be sealed too soon, you will be sealing in any problems and the application of sealant cannot easily be reversed. Its penetration comes about by solvent evaporation, penetrating into the blocks and binding the particles of sand to form an elastomeric joint and protect the paver face from oil and water infiltration. All forms of Smartseal block paving sealant will set jointing sand rock solid, but if the joints have not been cleaned thoroughly, the sealer will not be able to work correctly. Acrylic based solution that provides a tough, long-lasting polymeric seal on concrete stone and brick surfaces.

This sealed surface will increase abrasion resistance and also protect the jointing sand from erosion and weed infestation and provide a barrier to contaminants thereby facilitating easy maintenance. If you want to prevent the surface from becoming slippery, we recommend mixing the treatment with silver sand or builder’s sand. I applied the sealer with a brush but found that using a cheap pressure sprayer was more effective and efficient.It will repel water, oil, fuel and dirt of all kinds to prevent surface staining and weather damage.

Multiple and regular top up coats of the acrylic block paving sealer will always increase the durability and reduce further maintenance required. I’ve tried many cheaper products that claim to have a shiny finish and have delivered a poor patchy result. Sprayers will provide the best results due to being less chance of interfering with the sanded joints.Therefore, it is always advised to test the sealant on a small discreet area before applying it to the whole driveway or patio. You’ll NEED good weather and you’ll NEED a clean surface but if you’ve got both of those, all you’ll need to turn an ugly yard into a garden is these two products.