Joined in 2023 
82 
63 About this deal
Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. Make sure that you have a Radioddity account registered under your PayPal account's primary e-mail address. Ability of up to 5 different digital modes, P25, DMR, D-Star, Yaesu Fusion, NXDN, along with some cross-mode capabilities with on the fly PTT access.
Tuning the duplexer: If you have taken the leap to build your first repeater, let me personally say congrats and thank you. Adjust the pots: If everything seems to work at this point, the next step is to tune the mmdvm’s adjustable audio pots. You can upload the TFT file via a USB to TTL serial adapter or by using a microSD card with the TFT file on it, inserted into the microSD card slot on the Nextion Display.Now here is where you can use Wifi if you want to , but for best results I would use your Ethernet socket on the RasPi.
If your looking at the rx offset value dont worry as this will vary between devices as you fine tune the value across different radios. Now on the TTL Converter (or if you wire it directly onto the board) you need to reverse the RX and TX so the Yellow RX wire will go to the TX on the TTL or board and the Blue TX wire will go onto the RX etc. Zum-radio control board MMDVM, connect to a radio with 9600Baud compatability "eg: ft7800, ft7900, ft8900, ftm100, ftm400 etc" and turn it into a multi mode digital node. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.
Now we just need to open a browser and type in your address bar, http://pi-star and it should give you your new Pi-Star dashboard.
I went to a fellow amateur radio operator’s house recently to test my board with his HP 8920A Service Monitor. I left Auto AP on because if the Pi doesn’t/can’t make a network connection, it will create a wifi hotspot of it’s own so you can connect to it and configure the network settings. If your product turns out to be a defective one with physical damage within 30 days from the initial receiving date.Use DPLUS for XRF – I don’t use XRF reflectors, so I left it turned off, but this would allow you to use the DPLUS protocol to connect to XRF Reflectors. But if you are seeing constantly high BER or not getting audio back, you will need to adjust the pots. Passion Radio does not provide programming support, you must contact the administrator of the network used in the event of a problem with connections to their network. If you’ve followed my site for a while, you’ll already know I like to document everything I experience so that maybe you don’t have to make the same mistakes I do or maybe I can help you find something you’re looking for.
Great Deal 
New Comment