PC-Products 087770 PC-7 Heavy Duty Permanent Repair Paste Epoxy, 1/2 Pound, Dark Grey

Product Information

You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. Centrecoat Epoxy Paste Adhesive has a high level of mechanical integrity and exhibits excellent bonding characteristics even under damp conditions. Moulds/tools reinforced with EMP160 paste can be used to produce parts using epoxy, polyester and vinylester resin systems, including prepregs (subject to maximum service temperature). NACE and CSSW certified technical support for all products with full project support available where required.

years of providing quality repair products ensures that you can do the job correctly the first time. Industrial Metal cures on wet surfaces and is effective on most plastics and wood as well as metalwork.When a dispersion is then added to the bulk of the epoxy it blends in easily, ensuring that the pigment is thoroughly mixed through the resin (rather than staying in lumps). Other substrates shall be sound, clean and free from dust, dirt, grease, oil and any oxidised surface layer. The two parts are differently coloured, simply mix until you can no longer distinguish between the two colours.

It’s your go-to repair paste for cracks in metal, fuel tanks (petrol or diesel), water and fuel pipes, plastic switch gear, steering wheels and much more. EMP160 can be used on its own or can be used to fill in corners or detailed sections on larger or more complex moulds before the main reinforcement is added.If they're cold, they will feel particularly thick, so the first thing would be to check the temperature you're storing them at. The datasheet states that the initial cure (on the pattern) should be a minimum of 24 hours at 20C before post-cure.