eco-filtration 50MM THREADED TANK CONNECTOR KOI FISH PUMP FILTER PIPE FITTING

Product Information

Please note that we try to give general advice, this may not be specific to your spa or hot tub so please always check with the equipment manufacturer first. The Threaded Tank Connector has been designed like a socket/joining bush, allowing for a rigid pipe to be solvent welded on either side of the connector. Black Waste 90 Degree Bends should be used in conjunction with Black Waste Solvent Weld PVC pipework.

The flange tank connector has been designed like a socket/joining bush, allowing for the ridged pipe to be solvent welded on either side of the connector. Simply glue over the end of the solvent weld pipe before fitting to the appropriate valve or fitting. The connecting Solvent Weld Pipework can then be glued into place using Solvent Weld Glue for a permanent connection. Our well trained staff have many years of experience in Horticulture, Agriculture, Parks, golf and domestic irrigation.Tank Connectors provide a secure, watertight way to connect Solvent Weld Pipework through the side wall of a filter box or water tank.

All fittings and pipework have smooth bores which aid in good flow characteristics and resistance to abrasion. These Elbows/Bends are great for joining two sections of pipe at a 45 Degree angle with limited friction loss.However, this excludes damages caused by accidents, neglect or misuse of the Pvc Metric Pressure Pipe Tank Connector / Bulk Head. It is suitable for domestic repair maintenance and improvement work making it suitable for domestic and industrial applications.

The flange tank connector is supplied with self-tapping stainless steel screw, the self-tapping screw can be used with tank/liner thickness of up to 5mm. A leading supplier of plumbing fittings, McAlpine comes with a variety of high-quality and competitive products to suit all plumbing solutions.The Flange Extension Kit consists of 6 stainless steel bolts, locking nuts, and 12 stainless steel washers. Pond plants are sent directly from our supplier to make sure the plants you receive are fresh and in great condition. As well as the options provided below, you can choose to restrict or block cookies through your browser settings at any time. These Reducers will fit directly into a pipe fitting of the larger stated size and allow a pipe of the smaller stated size to fit into it.

Please note the size of the threaded tank connector is gauged on what DIA(mm) ridged pipe it works with. These Washers/Gasket Seals are for use with the Kockney Koi Solvent Weld Tank Connectors (available separately). Slacken the compression nut on the dry side of the fitting until you can see roughly half of the threaded section it hides – then – after inserting the correct size pipe liner into your MDPE length, push the pipe into place – in the middle of the nut, the split ring, and the o-ring. Please Note: Due to the design, these tank connectors reduce the diameter in the centre of the connector.If a larger bore diameter is required, we recommend upsizing on the tank connector bulkhead and using reducing spigots in each end to maintain a constant internal diameter. First, you should tidy up the cut you’ve made on the MDPE pipe – and it’s a good idea to chamfer the end if you’re working with a pipe over 40mm in diameter.