Ronseal Smooth Finish Fller Big Hole 1.2L

Product Information

And the good thing is you can drill or screw into this wood epoxy filler later if you need to in the future. Spread a small blob over the hole and wait for it to dry. Once dry, get a 180-220 grit sandpaper and rub down until smooth and blended with the current surface. How do You Fix a Hole in Plasterboard on the Ceiling? Once filled, smooth the filler out by moving the knife over in different directions, starting from the centre of the filled area. Repeat until you have a smooth surface. If you’re confused over which filler is right for your job why not take a look at our video to help you.

There are also a variety of specialist fillers on the market, such as ones suited for outdoor use. Some of the more common ones are: The best way to choose the right wood filler to repair gouges and large-sized holes in your wood is to know the types of filler materials out there. By combining equal parts sawdust and white wood glue, it forms a paste that can be used to fill holes. The first thing to do is to cut out a rectangle around the hole using a steel rule and a Stanley knife. Alternatively, mark out with a pencil and ruler and cut out with a jab saw.For good measure, leave the paint to dry overnight so you’re guaranteed that it is completely dry before applying the second coat. No matter whether you want to repair small nail holes or want to fix some large gaps in the wood, it still works fine. You mix it like dough and mold it like clay even after it dries. When it hardens, you can carve it just like any wood.

Regular Updates: Our recommendations stay current with any changes in product performance or availability. If you’ve had problems with filler sinking or sagging in the middle when you’re trying to repair larger holes, don’t worry, it’s nothing you’re doing wrong. A high-quality wood primer needs to be applied so that the paint would adhere to the surface of the wood you’re painting. Now draw two lines across the gap to create a rectangle around the hole. Cut out the existing plasterboard with a sharp Stanley knife or use a small jab saw.

About Project

Moisture resistant fillers – Designed to cope with humid environments, such as kitchens and bathrooms. Cut a piece of plasterboard that is slightly narrower than the hole but an inch or so longer top and bottom. Screw in a long screw in the middle of the patch; this will be used to position the patch in place.