0.6mm Y Shape Tri-Point Y000 Tri-Wing Screwdriver Tool Kit Compatible with Apple Watch Repair Opening Tool

Product Information

This is one of those things that requires a little bit of money to be spent because the tool manufacturing process and material used both need to be top-notch. Some screws have heads designed to accommodate more than one kind of driver, sometimes referred to as combo-head or combi-head. The most common of these are a combination of a slotted/Phillips head. a b c d Capotosto, Rosario (December 1996). "Screwdriver Basics". Popular Mechanics. 173 (12): 82–83. ISSN 0032-4558. Archived from the original on 2017-02-16 . Retrieved 2016-09-24. Triangular recesses and heads". Screw drive systems. Archived from the original on 2016-10-24 . Retrieved 2017-09-02.

The Phillips/square screw drive, also known as the Quadrex, Pozisquare screw drive, is a combination of the Phillips and Robertson screw drives. While a standard Phillips or Robertson tool can be used, there is also a dedicated tool for it that increases the surface area between the tool and the fastener so it can handle more torque. [62] Recex [ edit ]ISO Fastener Standards Should Be Referenced for All Metric Fasteners" (PDF). Archived (PDF) from the original on 2021-06-26 . Retrieved 2021-10-16.

According to needs, there are light-duty screwdrivers and heavy-duty screwdrivers. They have a flat tip. Although it can be powered or manually operated, the ‘cam-out effect’ of the slotted head makes power operation less common. Phillips, JIS, Pozidriv, SupaDriv and other screw drive types". blog.jtbworld.com. Archived from the original on 2014-07-01 . Retrieved 2017-09-02. In addition to screw drives, various nut drives have been designed to make removal difficult without specialized tools. Proprietary examples include T-Groove, Slot-Lok, Pentagon, Tork-Nut, T-Slope and Spanner designs. [69] Breakaway head [ edit ] Pavlis, Egon "arcticpenguin" [pseudonym]. "When a Phillips is not a Phillips Plus So Much More!". Instructables: share what you make. Instructables. Archived from the original on 2012-02-09 . Retrieved 2012-03-11. Slot screw drives have a single horizontal indentation (the slot) in the fastener head and is driven by a "common blade" or flat-bladed screwdriver. This form was the first type of screw drive to be developed, and for centuries, it was the simplest and cheapest to make because it can just be sawed or filed. Additionally, it is unique because the slot head is straightforward to manufacture, and because it can be driven by a simple handtool. The slotted screw is commonly found in existing products and installations, along with use in simple carpentry work and in applications where minimal torque is needed. Slot screws are also used in the restoration of antique furniture, vehicles, and equipment.

15 Answers

A U-drive screw has a helical thread with an angle acute enough to be driven by a hammer or pressure from an arbor press, and thus has a domed head with no means of turning it. [92] These are most frequently driven into plastics with a pre-drilled pilot hole. a b c "Unterschied zwischen Pozidrive und Superdrive"[Difference between Pozidriv and Supadriv] (in German). Goedkopeschroevenkopen.nl. Archived from the original on February 22, 2014 . Retrieved 2014-03-20. a b c d e f g Rybczynski, Witold (2000). One good turn: a natural history of the screwdriver and the screw. New York [u.a.]: Scribner. ISBN 0-684-86729-X. Get a proper Y000 driver, don't use Y00 as someone suggested. Don't use hot glue. Rubber bands do sometimes work but they won't in this case because the screw is too small and the driver will poke right through the rubber band with the application of any pressure.

The Pozidriv, sometimes incorrectly spelled "Pozidrive", is an improved version of the Phillips screw drive. It is designated "Type IA" by ANSI standards. [20] and "Type Z" in ISO documents. The Pozidriv was patented by GKN Screws and Fasteners in 1962. [21] [22] It was designed to allow more torque to be applied and greater engagement than Phillips drives. As a result, the Pozidriv is less likely to cam out. [10] [23] [24] It is similar to, and compatible with, the Supadriv screw drive. [25] On the upper part, either there is a hole through which a wire is passed, or this end is made flat so that when this part is fixed to handle, it does not allow the shank to move separately. These are generally made of carbon steel. #3 Blade ISO 8764-1:2004(E) Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 1: Driver tips" (PDF). Archived (PDF) from the original on 2023-04-30 . Retrieved 2023-05-01. The purpose of a screwdriver is to both insert and remove screws and nuts. If you want to replace a watch’s battery, you won’t use the same screwdriver you use to hang a shelf on a wall. The different functional screwdriver design types are described below. The applicable standards that govern the Torq-set geometry are National Aerospace Standard NASM 33781 and NASM 14191 for the ribbed version. The ribbed version is also known as ACR Torq-set. [84] Tri-angle [ edit ]The Type II (Conical/Connie) design adds a conical cup that receives a centering pin on the driver, improving the alignment of the driving tool to the fastener recess. The Supadriv (sometimes spelled incorrectly as "Supadrive") screw drive is very similar in function and appearance to Pozidriv. It is a later development by the same company. The description of the Pozidriv head applies also to Supadriv. While each has its own driver, [26] the same screwdriver heads may be used for both types without damage; for most purposes it is unnecessary to distinguish between the two drives. Pozidriv and Supadriv screws are slightly different in detail; the later Supadriv allows a small angular offset between the screw and the screwdriver, while Pozidriv has to be directly in line. [25] [27] [28] One of the greatest tool inventions ever made is the screwdriver. Screwdrivers were reportedly created in the 15th century, and as we moved into the 21st century, you could find them in almost every toolbox. The triple-square, also known as XZN, is a type of screw drive with 12 equally spaced protrusions, each ending in a 90° internal angle. The name derives from overlaying three equal squares to form such a pattern with 12 right-angled protrusions (a 12-pointed star). In other words, three Robertson squares are superimposed at a successive 30° rotation. The design is similar to that of the double-square—in both cases, the idea being that it resembles a square (Robertson) but can be engaged at more frequent angles by the driver bit. These screws can be driven with standard Robertson bits. The pentalobe screw drive is a five-pointed tamper-resistant system implemented by Apple in its products. [43] Apple's first use of the pentalobe drive was in mid-2009 to secure the battery in the MacBook Pro. Smaller versions are now used on the iPhone 4 and subsequent models, the MacBook Air (since the late 2010 model), the MacBook Pro with Retina Display and the 2015 MacBook. Pentalobe screw sizes include TS1 (also known as P2 or 0.8mm, used on the iPhone 4 and subsequent models), TS4 (also known as P5 or 1.2mm, used on the MacBook Air [since late 2010], the MacBook Pro with Retina Display and the 2015 MacBook) and TS5 (also known as P6 or 1.5mm, used on the 2009 MacBook Pro battery). The TS designation is ambiguous as it is also used for a Torq-set screw drive.