Simply SP-037 Spray Putty 400ml – Fast Drying – Great Adhesion – Corrosion Preventive – Multiple Application

Product Information

I chose to include all these in the model as they are different examples of some common features you might find in the various models you can print, and to show how some of the features can be lost or diminished. Otherwise, too much water (and therefore volume) would be drawn in too quickly and it would collapse.

Use the applicator provided to apply to deep scratches and chips for an even finish that’s easy to paint on.MaxMeyer Plastomax is an extremely high build polyester spray filler designed for thick film repairs, offering fast drying and easy sanding. I use 3M Pro Grade Precisionbecause its backing is a little sturdier so it doesn't rip as easily and it lasts a while longer because the grit doesn't gum up as quickly as normal sandpaper. If the spray pressure is set too low, the spray jet will collapse, too high a pressure will increase overspray and stress the longevity of the machine and its individual parts. The filler can be used on both treated and untreated surfaces of wood, metal and aluminum, and the good filling properties as well as excellent adhesion make it incredibly easy to work with. p>

To access Klarna finance, you’ll need to have a web enabled device with you at point of purchase.

Be it before or after using either of the above products, it is essential to have a surface that is clean. GREAT ADHESION— our Putty Spray will adhere to most metal and wood, providing a long-lasting effect.They used to be totally smooth down the side, but age has revealed the layered and rough base built underneath. Synthetic resin fillers are always ready-mixed with the help of solvents and are therefore always dispersion fillers. Temperature, humidity and the amount of Spray-Putty have an effect on the length of the drying time.

This is what finishing consists of; a fine balance between adding and subtracting material to achieve the desired surface finish. Don't spray right up against your print: if you spray too close to your print, you risk getting noticeable drips in the paint job.As an example Ral3020 in Raptor, 2K Direct Gloss, Basecoat, and GIO side by side will all be DIFFERENT, even though they are made with EXACTLY the same tint. Both exhibit good adhesion properties and can be used on a range of surfaces like metal, fibreglass, and even wood. To apply spot putty, either use your gloved finger, a small paddle, scrapers, the side of a plastic scrap, a popsicle stick, it doesn't really matter. This is not the case with synthetic or synthetic resin fillers: the surfaces is too smooth in many places, and in this case we recommend following the filling process with a spray of primer.