DRYSEAL PENETRATING DAMP WATERPROOF TREATMENT CREAM 3L

Product Information

Dependent on porosity, the effective siloxane ingredient deeply penetrates the substrate within a short period of time (between 30 minutes to several hours) where it reacts to become a polymer silicone resin. Q: Hi, I covered my gable end with 2 coats of Thompson's water sealer about 2 years ago and I still have water coming in. As opposed to conventional liquid products, Dryseal can be applied in one working operation to achieve the desired loading for maximum effectiveness. yes that's what I was thinking - but is it better than the significantly cheaper Thompsons water seal?

It’s rained since I’ve applied this and the water just sits on top similar to when you’ve waxed a car. The Dryseal system is also suitable for insulated “warm” roofs and can be finished to look like lead or zinc by adding decorative trims. Only open containers to remove the amount of product required and then close the lid once the product has been taken out.Adjoining Surfaces: Due to the thixotropic nature of this product, where it is applied by brush or roller, accidental contamination of non-target surfaces can usually be avoided by taking reasonable care. This highly effective damp proofing system will also provide a highly effective additional barrier to flooding as part of any existing flood protection system. This effect should not be confused with the “beading” effect often associated with water repellents. Dryseal has been formulated to penetrate as deeply as possible into porous masonry substrates and this provides optimal protection against the absorption of water and pollutants as well as frost/salt damage. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice.

A one-coat application, Water Repellent / Waterproofing Cream used for the treatment of Penetrating Damp in external masonry surfaces. Before a water repellent impregnation is carried out, crusts of dirt and pollutants as well as efflorescence, algae and moss must be removed by a suitable cleaning procedure. DrySeal also protections against pollutants and damage from frost and salt, and prevents water penetration even under wind pressure. The silane cream remains on the surface after application and penetrates deeply into capillary pores over time until fully absorbed. As opposed to conventional liquid products, DRYSEAL can be applied in just one working operation to achieve the desired loadings for maximum effectiveness.The proposal is to power wash, repoint where necessary (some will come out with the washing, some is already off, most is perfectly sound) and then to coat the walls with the masonry cream. Please note that given the current circumstances alot of carrier companies are struggling to keep up with demand and although we do book these deliveries as next day services, the carriers cannot always fulfil these and an extra day may be required. Dependent on the substrate, type and degree of soiling, we recommend the use of various Wykamol surface cleaners (e. However when these claims for products (like insulation sprayed on the underside of the roof) appear the term "Snake Oil" comes to mind.

Reduction of wind chill is also reduced to some extent by the interwoven stems of deciduous climbers during winter. Surface Preparation - Dryseal is especially useful for treating cementitious materials including concrete blockwork as well as natural stone, clay and sand/lime bricks etc.

Dryseal is a BBA approved external brick and render water repelling, salt inhibiting masonry protection cream which is deeply penetrating and can be used on all types of masonry.