NARWAL T10 Mop Robot, 4-in-1 Robot Vacuum and Mop with Self Cleaning Station, Self Washing and Drying Robot Mop with LiDAR Navigation, Smart Mapping, 2 Suction Mode for Hard Floor and Pet Hair, White

Product Information

We spilled some maple syrup on the floor and let it dry out a bit, and the T10 was able to get most of it off, but a sticky residue remained after the floors had been left to dry.

Lidar can work normally in the dark, however dark objects may weaken the signal received by the infrared sensor, and the obstacle avoidance effect may decrease to a certain extent. Also, Freo can adjust the pressure and wetness for different floor types: Wood floor [7N + Dry], Hard floor [12N + Normal]. The dust bag in the docking station held enough dirt that I haven't needed to change it after a few weeks of use. While the T10 will wash the pads during cleaning and dry them off, it’s a good idea to remove the pads from the robot and wash them properly by hand as well, simply because we found that the T10’s washing skills to not be adequate enough to remove stubborn dirt from the pads.Set-up was relatively simple, just download the app and go through the steps to connect the T10 to your home Wi-Fi network so you’ll be able to track its progress and maps. Compared to other similar vacuums from Dreametech or Roborock, the Freo seemed to glide across the floor.

Then Freo sanitizes the mop pads in high-speed spinning with the exact amount of water mixed with the scientific ratio of floor cleaner(included in the package). The two-tank system separates fresh and used water and has capacity enough to clean up to 2,150 square feet of space over a three-hour period. It uses a copy of the map you created during the first vacuuming operation, so you can mark a distinct set of no-go zones for area rugs or rooms with carpeted floors that you don’t want to get wet. No matter how many schedules I created, setting my time zone as Los Angeles, United States, the app always defaulted to the Hong Kong, China time zone. The RoboVac X8 is now available, and it produces 2,000 pascals of suction in each of its twin turbines.The front soft bumper protects the robot from slamming into objects or furniture, and also helps it map out obstacles to avoid in the future. The base station also has two buttons and an LED screen that shows the status of the current cleaning cycle. Mopping starts at the farthest distance from the base station to avoid dirty mops covering already-cleaned floors.

While that means you’ll need to change the water frequently, it takes just a minute, and because the water doesn’t stew in a tank for weeks, it doesn’t have time to develop the gag-inducing death stench we got with the Roborock S7 MaxV Plus.Narwal detergent sheets include newly-developed proprietary ingredients and biodegradable enzymes for an instant and homogeneous water solution for stain removal. There was a blob of unidentifiable gunk the consistency of children’s putty that I thought sure I’d have to scrape up manually, but the Narwal scrubbed it off with no problem. When you do this in the app, you’ll discover that there are just 12 names to choose from—you can’t create custom names or change any of the presets. Selectively mopping or vacuuming a room is as easy as tapping on the room in the app, and pressing Start.

This sleek little robot was able to navigate over tricky areas, sense when the mops were dirty and needed to go back to the base station to self-clean, get under tables and bed easily, and it left the floors spotless and sparkling. A pair of drive wheels, an omni-directional wheel, cliff sensors, and the vacuum inlet are on its bottom. inches and includes a pair of removable 5-liter tanks, one for fresh water and one for waste, and a charging dock at the bottom where the robot slots in. The only thing I found lacking was the ability to use the camera on the vacuum to view its surroundings remotely. Once the robot has drawn a map of your home, you’ll want to partition it into rooms, so that you can spot clean instead of cleaning the entire house every time.The Narwal comes with a base station that both charges the robot and cleans and dries the mops once it finishes a job. But instead of the roller and spin brushes you’ll find on the typical robot vacuum, the Narwal has a pair of studs to which you attach either a sweeping or mopping module, depending on the job you want it to tackle. Instead of a thin cloth, it spins microfiber mops, using a combination of speed and pressure to lift up dirt and scrub stains. The base station has both a large clean water tank and a waste water tank that’s designed to cover mopping for up to 3000 sq ft.